中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
CHARACTERIZATION OF TiAl PRE-ALLOYED POWDER AND ITS DENSIFICATION MICROSTRUCTURE

文献类型:期刊论文

作者Wang Gang; Zheng Zhuo; Chang Litao; Xu Lei; Cui Yuyou; Yang Rui
刊名ACTA METALLURGICA SINICA
出版日期2011-10-11
卷号47期号:10页码:1263-1269
关键词TiAl gas atomization metastable phase rnicrosegregation
ISSN号0412-1961
DOI10.3724/SP.J.1037.2011.00136
通讯作者Cui Yuyou(yycui@imr.ac.cn)
英文摘要TiAl pre-alloyed powder (nominal composition Ti-47Al-2Cr-2Nb-0.2W-0.15B, atomic fraction, %) was produced by electrode induction melting gas atomization (EIGA) technique. The average diameter is 120.7 mu m, and the distribution of the powder diameter follows Gaussian distribution. The phase constitution is a function of particle diameter. The amount of the gamma phase increases with powder diameter increasing, the finest powder consists of predominantly alpha(2) phase. The alpha(2) phase in the powder was transformed into gamma phase after annealing at temperatures higher than 500 degrees C. Local coarsening was observed in the microstructure of TiAl compact duo to the microsegregation of elements in the powder. The)(PS result indicated that the outer layer of the TiAl pre-alloyed particle consists of a thin layer of Al(2)O(3) and TiO(2).
WOS研究方向Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:000298903300007
出版者SCIENCE PRESS
源URL[http://ir.imr.ac.cn/handle/321006/106415]  
专题金属研究所_中国科学院金属研究所
通讯作者Cui Yuyou
作者单位Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Wang Gang,Zheng Zhuo,Chang Litao,et al. CHARACTERIZATION OF TiAl PRE-ALLOYED POWDER AND ITS DENSIFICATION MICROSTRUCTURE[J]. ACTA METALLURGICA SINICA,2011,47(10):1263-1269.
APA Wang Gang,Zheng Zhuo,Chang Litao,Xu Lei,Cui Yuyou,&Yang Rui.(2011).CHARACTERIZATION OF TiAl PRE-ALLOYED POWDER AND ITS DENSIFICATION MICROSTRUCTURE.ACTA METALLURGICA SINICA,47(10),1263-1269.
MLA Wang Gang,et al."CHARACTERIZATION OF TiAl PRE-ALLOYED POWDER AND ITS DENSIFICATION MICROSTRUCTURE".ACTA METALLURGICA SINICA 47.10(2011):1263-1269.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。