Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing
文献类型：期刊论文
| 作者 | Zhang, Q.; Xiao, B. L.; Wang, D.; Ma, Z. Y. |
| 刊名 | MATERIALS CHEMISTRY AND PHYSICS
 |
| 出版日期 | 2011-11-01 |
| 卷号 | 130期号:3页码:1109-1117 |
| 关键词 | Composite materials Intermetallic compounds Powder metallurgy Friction stir processing |
| ISSN号 | 0254-0584 |
| DOI | 10.1016/j.matchemphys.2011.08.042 |
| 通讯作者 | Ma, Z. Y.(zyma@imr.ac.cn) |
| 英文摘要 | In situ Al3Ti/Al composites were fabricated by a combination of vacuum hot pressing (VHP) and friction stir processing (FSP). The formation mechanism of the Al3Ti and the effect of VHP and FSP parameters on the resultant microstructure and mechanical properties were investigated. The Al3Ti formed due to the reactive diffusion between Al and Ti during VHP, and the number of Al3Ti particles increased with increasing the temperature and holding time of the VHP. FSP not only induced the Al-Ti reaction, but also resulted in significant refining of the Al3Ti, thereby creating a homogeneous distribution of Al3Ti particles in the Al matrix. These microstructural changes led to significant improvement in the tensile properties of the in situ Al3Ti/Al composite. However, the change trends of the tensile properties of the FSP samples were dependent on the extent of the Al-Ti reaction during VHP. (C) 2011 Elsevier B.V. All rights reserved. |
| 资助项目 | National Natural Science Foundation of China[50890171] ; National Basic Research Program of China[2011CB606301] ; National Outstanding Young Scientist Foundation[50525103] |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000296830500044 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China ; National Basic Research Program of China ; National Outstanding Young Scientist Foundation |
| 源URL | [http://ir.imr.ac.cn/handle/321006/107209]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Ma, Z. Y. |
| 作者单位 | Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Q.,Xiao, B. L.,Wang, D.,et al. Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing[J]. MATERIALS CHEMISTRY AND PHYSICS,2011,130(3):1109-1117. |
| APA | Zhang, Q.,Xiao, B. L.,Wang, D.,&Ma, Z. Y..(2011).Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing.MATERIALS CHEMISTRY AND PHYSICS,130(3),1109-1117. |
| MLA | Zhang, Q.,et al."Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing".MATERIALS CHEMISTRY AND PHYSICS 130.3(2011):1109-1117. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。