Cyclic hardening mechanisms in [001] copper single crystals
文献类型：期刊论文
| 作者 | Gong, B; Wang, ZR; Wang, ZG |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 1998-04-30 |
| 卷号 | 245期号:1页码:55-63 |
| 关键词 | friction stress back stress multiple slip crystals KW-L model |
| ISSN号 | 0921-5093 |
| 通讯作者 | Wang, ZR() |
| 英文摘要 | Friction stress and back stress of [001] Cu single crystals during cyclic deformation were derived from cyclic stress-strain hysteresis loops by using the Cottrell method and the results are compared with those for single slip crystals. The cyclic hardening features of the [001] crystals are described in terms of the friction stress and back stress. Specific, detailed study was carried out on the sample cycled with a plastic strain amplitude of 1.8 x 10(-3). It has been shown that both the 'true' friction stress, i.e. the cyclic yield stress, and the back stress in the [001] crystals increase much more rapidly than those in single slip crystals in the hardening stage. In the saturation stage, however, only the friction stress in the [001] crystal is higher than its correspondent in the single slip crystals, while the back stresses in these two types of crystals are close to each other. The higher friction stress in the [001] crystal is related to the higher density of jogs produced by the dislocation reactions between the primary and critical slip systems, and the existence of secondary dislocations in channels. The higher back stress in the hardening stage is attributed to the higher dislocation density in loop patches introduced by dislocation reactions in the first dozen of cycles. By modifying the Kulhlmann-Wilsdorf and Laird model, it is possible now to express quantitatively both the back stress and the shear stress in a cyclically deformed crystal with a particular orientation as functions of the applied strain amplitude as well as an orientation-dependent factor: the hardening coefficient for the first stage of unidirectional deformation. The predictions from these expressions for multiple slip crystals are in very good agreement with experimental data. (C) 1998 Elsevier Science S.A. All rights reserved. |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000073504100007 |
| 出版者 | ELSEVIER SCIENCE SA |
| 源URL | [http://ir.imr.ac.cn/handle/321006/108462]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, ZR |
| 作者单位 | 1.Univ Toronto, Dept Met & Mat Sci, Toronto, ON M5S 3E4, Canada 2.Chinese Acad Sci, Inst Met Res, State Key Lab Fatigue & Fracture Mat, Shenyang, Peoples R China |
| 推荐引用方式 GB/T 7714 | Gong, B,Wang, ZR,Wang, ZG. Cyclic hardening mechanisms in [001] copper single crystals[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,1998,245(1):55-63. |
| APA | Gong, B,Wang, ZR,&Wang, ZG.(1998).Cyclic hardening mechanisms in [001] copper single crystals.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,245(1),55-63. |
| MLA | Gong, B,et al."Cyclic hardening mechanisms in [001] copper single crystals".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 245.1(1998):55-63. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。