Application of a fractal method to quantitatively describe some typical fracture surfaces
文献类型：期刊论文
| 作者 | Li, XW; Tian, JF; Li, SX; Wang, ZG |
| 刊名 | MATERIALS TRANSACTIONS JIM
 |
| 出版日期 | 2001 |
| 卷号 | 42期号:1页码:128-131 |
| 关键词 | fractal dimension fracture surface quantitative measurement vertical sectioning secondary electron line scanning |
| ISSN号 | 0916-1821 |
| 通讯作者 | Li, XW() |
| 英文摘要 | By using a vertical sectioning method (VSM) or secondary electron line scanning method (SELSM), the fractal dimension Ds for surface, D-L for scanning profile were measured quantitatively on some typical fracture surfaces, namely cleavage fractures, dimple fractures and fatigue fractures of composite materials. It was shown that the measured value of Ds relates differently to the impact energy values of materials for cleavage or dimple fractures. The microstructure of materials should be considered comprehensively when relating D-S to the mechanical properties of materials. It is found that the correlation between the fractal dimension and the impact energy obtained by SELSM and VSM methods appears to be quite similar. Moreover, the quantitative measurements on the fatigue fracture surfaces of SiC/Al composite materials showed that SiC volume fraction has a strong effect on fractal dimension D-S, and that there is an obvious difference in the D-S values for fatigue fractures which are due to different fracture mechanisms. These results show that it is possible to reflect the fracture mechanism using D-S and relate it to the fracture properties of materials. |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000166888800019 |
| 出版者 | JAPAN INST METALS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/113514]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, XW |
| 作者单位 | Chinese Acad Sci, Met Res Inst, State Key Lab Fatigue & Fracture Mat, Shenyang 110015, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, XW,Tian, JF,Li, SX,et al. Application of a fractal method to quantitatively describe some typical fracture surfaces[J]. MATERIALS TRANSACTIONS JIM,2001,42(1):128-131. |
| APA | Li, XW,Tian, JF,Li, SX,&Wang, ZG.(2001).Application of a fractal method to quantitatively describe some typical fracture surfaces.MATERIALS TRANSACTIONS JIM,42(1),128-131. |
| MLA | Li, XW,et al."Application of a fractal method to quantitatively describe some typical fracture surfaces".MATERIALS TRANSACTIONS JIM 42.1(2001):128-131. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。