Stabilization effect of martensite and shape memory effect of TiNi thin film
文献类型：期刊论文
| 作者 | Liu, XP; Jin, W; Cao, MZ; Yang, DZ; Chen, FX |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2002-02-01 |
| 卷号 | 38期号:2页码:193-195 |
| 关键词 | TiNi thin film stabilization effect of martensite shape memory effect |
| ISSN号 | 0412-1961 |
| 英文摘要 | The transformation behaviors of the deformed Ti(51)Ni(49), thin film were investigated by differential scanning calorimeter measurement (DSC). The experimental results show that the deformation causes a stabilization effect on the inartenite. The reverse transformation temperature of the deformed Ti(51)Ni(49) film was elevated to higher temperature on the first licating. However, the stabilization effect on the martensite vanishes in the subsequent thermal cycles. The martensitic transformation temperature of the deformed Ti(51)Ni(49) was decreased by deformation. but the R-phase transformation was not affected. The experimental results also indicate that the recovery strain of Ti(51)Ni(49) film increases with increasing the deformation strain which may reach a maximum value of 4.5% as the sample deformed to 6% strain. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000174398200020 |
| 出版者 | SCIENCE CHINA PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/114091]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Dalian Univ Technol, Dept Mat Engn, Dalian 116024, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, XP,Jin, W,Cao, MZ,et al. Stabilization effect of martensite and shape memory effect of TiNi thin film[J]. ACTA METALLURGICA SINICA,2002,38(2):193-195. |
| APA | Liu, XP,Jin, W,Cao, MZ,Yang, DZ,&Chen, FX.(2002).Stabilization effect of martensite and shape memory effect of TiNi thin film.ACTA METALLURGICA SINICA,38(2),193-195. |
| MLA | Liu, XP,et al."Stabilization effect of martensite and shape memory effect of TiNi thin film".ACTA METALLURGICA SINICA 38.2(2002):193-195. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。