Comparison of the characteristics of nanocrystalline ferrite in Fe-0.89C steels with pearlite and spheroidite structure produced by ball milling
文献类型：期刊论文
| 作者 | Xu, Y; Umemoto, M; Tsuchiya, K |
| 刊名 | MATERIALS TRANSACTIONS
 |
| 出版日期 | 2002-09-01 |
| 卷号 | 43期号:9页码:2205-2212 |
| 关键词 | ball milling pearlite spheroidite nanocrystalline ferrite deformation cementite dissolution annealing grain growth |
| ISSN号 | 1345-9678 |
| 通讯作者 | Xu, Y() |
| 英文摘要 | Nanocrystalline ferrite formation by ball milling in Fe-0.89C steels with initial pearlite and spheroidite microstructures and their annealing behaviors have been studied through microstructural observation and microhardness measurement. It was found that nanocrystalline ferrite first forms near the surface of powders due to localized severe deformation. The microhardness of nanocrystalline ferrite regions is much higher than that of work-hardening regions. The dissolution of cementite was observed together with the nanocrystallization of ferrite. The nanocrystallization rate of pearlite powder is faster than that of spheroidite powder due to higher work-hardening rate and smaller cementite size. After long time ball milling, the equiaxed nanocrystalline ferrite with less than 10 nm grain size forms in the whole powders of both pearlite and spheroidite structures, and the cementite dissolves completely. By annealing the milled pearlite and spheroidite powders, recrystallization was observed in the work-hardening regions, while continuous grain growth was observed in the nanocrystalline ferrite region. After annealing, microhardness of the former nanocrystalline ferrite region is always higher than that of the former work-hardening region when compared at the same annealing condition. The grain growth rate of nanocrystalline ferrite produced from pearlite structure is lower than that of spheroidite structure due to the finer grains. |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000178449800010 |
| 出版者 | JAPAN INST METALS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/115269]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Xu, Y |
| 作者单位 | 1.Chinese Acad Sci, Met Res Inst, Shenyang 110015, Peoples R China 2.Toyohashi Univ Technol, Dept Prod Syst Engn, Toyohashi, Aichi 4418580, Japan |
| 推荐引用方式 GB/T 7714 | Xu, Y,Umemoto, M,Tsuchiya, K. Comparison of the characteristics of nanocrystalline ferrite in Fe-0.89C steels with pearlite and spheroidite structure produced by ball milling[J]. MATERIALS TRANSACTIONS,2002,43(9):2205-2212. |
| APA | Xu, Y,Umemoto, M,&Tsuchiya, K.(2002).Comparison of the characteristics of nanocrystalline ferrite in Fe-0.89C steels with pearlite and spheroidite structure produced by ball milling.MATERIALS TRANSACTIONS,43(9),2205-2212. |
| MLA | Xu, Y,et al."Comparison of the characteristics of nanocrystalline ferrite in Fe-0.89C steels with pearlite and spheroidite structure produced by ball milling".MATERIALS TRANSACTIONS 43.9(2002):2205-2212. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。