Technology of sheet hydroforming with a movable female die
文献类型：期刊论文
| 作者 | Zhang, SH; Zhou, LX; Wang, ZT; Xu, Y |
| 刊名 | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
 |
| 出版日期 | 2003-06-01 |
| 卷号 | 43期号:8页码:781-785 |
| 关键词 | hydroforming sheet metal forming movable die |
| ISSN号 | 0890-6955 |
| DOI | 10.1016/S0890-6955(03)00057-9 |
| 通讯作者 | Zhang, SH() |
| 英文摘要 | An improved sheet hydroforming process is proposed and investigated experimentally and numerically. A movable female die keeps in contact with the deformed area of the sheet blank so that further deformation of the deformed area is restricted. Under the sealing, the sheet blank under the flange can be drawn in. So the hydroformed part has less thinning than the hydrobulge formed part only, and the limit drawing ratio of the sheet can be remarkably improved. This process is especially suitable for forming of small batch production of sheet metal parts with complicated shapes. The female die can be replaced with other female die of various shapes, and can also be made of very cheap materials such as plaster and hard wood instead of metal when the part number is very small. Thus complex-shaped sheet parts can be formed with less expensive tool systems. In this paper, the hydroforming processes of part A (without a movable die) and part B (with a movable die) were investigated by experiment and by elastoplastic FEM. The effects of various process parameters on the deformation of the sheet blanks were investigated. The forming conditions affecting wrinkling and rupture have been analyzed. The effects of friction and contacting force acting on the experimental results are also discussed. (C) 2003 Elsevier Science Ltd. All rights reserved. |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000183033200004 |
| 出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
| 源URL | [http://ir.imr.ac.cn/handle/321006/116523]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhang, SH |
| 作者单位 | 1.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China 2.Shenyang Inst Technol, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, SH,Zhou, LX,Wang, ZT,et al. Technology of sheet hydroforming with a movable female die[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2003,43(8):781-785. |
| APA | Zhang, SH,Zhou, LX,Wang, ZT,&Xu, Y.(2003).Technology of sheet hydroforming with a movable female die.INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,43(8),781-785. |
| MLA | Zhang, SH,et al."Technology of sheet hydroforming with a movable female die".INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE 43.8(2003):781-785. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。