Formation of W particles/La55Al25Cu10Ni5Co5 glassy alloy matrix composites by mechanical milling
文献类型：期刊论文
| 作者 | Zhang, XQ; Jian, X |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2004-06-01 |
| 卷号 | 40期号:6页码:647-652 |
| 关键词 | mechanical alloying amorphous alloy glass transition lanthanum alloy |
| ISSN号 | 0412-1961 |
| 通讯作者 | Jian, X(jianxu@imr.ac.cn) |
| 英文摘要 | Prealloyed powders of La55Al25Cu10Ni5Co5 and its mixtures with tungsten particles were subjected to a high-energy ball milling. Structural evolution in the milled products was characterized using X-ray diffraction, transmission electron microscopy and differential scanning calorimetry. Mechanical milling of La55Al25Cu10Ni5Co5 alloy consisting of several intermetallics results in a formation of glassy alloy similar to that obtained by melt undercooling. The La-based glassy alloy formed by ball milling exhibits a well-defined glass transition and wide supercooled liquid region, DeltaT(x), about 76 K. For the ball-milled mixtures of the intermetallics with tungsten particles up to 30% (volume fraction), the composites formed, in which tungsten particles were refined to a size around 5-120 nm and dispersed in glassy alloy matrix. With increasing the tungsten content, the glass transition temperature, T-g and onset temperature of crystallization, T-x1, of the matrix alloy shifted towards a higher temperature, accompanied by an extension of DeltaT(x). The DeltaT(x) value about 92 K is achieved in the composite with content of 30% W. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000222338500018 |
| 出版者 | SCIENCE CHINA PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/118713]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Jian, X |
| 作者单位 | Chinese Acad Sci, Met Res Inst, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, XQ,Jian, X. Formation of W particles/La55Al25Cu10Ni5Co5 glassy alloy matrix composites by mechanical milling[J]. ACTA METALLURGICA SINICA,2004,40(6):647-652. |
| APA | Zhang, XQ,&Jian, X.(2004).Formation of W particles/La55Al25Cu10Ni5Co5 glassy alloy matrix composites by mechanical milling.ACTA METALLURGICA SINICA,40(6),647-652. |
| MLA | Zhang, XQ,et al."Formation of W particles/La55Al25Cu10Ni5Co5 glassy alloy matrix composites by mechanical milling".ACTA METALLURGICA SINICA 40.6(2004):647-652. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。