Microstructure and wear property of Fe-Mn-Cr-Mo-V alloy cladding by submerged arc welding
文献类型:期刊论文
作者 | Lu, SP; Kwon, OY; Kim, TB; Kim, KH |
刊名 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
![]() |
出版日期 | 2004-04-10 |
卷号 | 147期号:2页码:191-196 |
关键词 | ladding microstructure ball-on-disk wear stoody alloy |
ISSN号 | 0924-0136 |
DOI | 10.1016/j.jmatprotec.2003.12.016 |
通讯作者 | Lu, SP(shplu@jwri.osaka-u.ac.jp) |
英文摘要 | A wear resistant Fe-Mn-Cr-Mo-V alloy cladding was deposited on SM45C (equivalent to AISI1045) substrate by automatic submerged arc welding using stoody 105 alloy wire. Microstructure and surface hardness of the cladding were investigated and measured on samples prepared under different welding conditions. The results showed that the retained austenite in the cladding increases with the increased welding current and reduced travel speed. The wear behavior of the clad was studied using ball-on-disk tribometer. Wear mechanism was analyzed based on the analysis of the worn surfaces both the clad and ball by scanning electron microscope (SEM) equipped with an energy dispersive spectrometer (EDS). The scanning electron microscopic examination of the worn surface shows that a layer of oxide film forms on the worn surface. Oxidation wear mechanism controls the wear process. The spalling of the oxide was caused by the repeated rubbing fatigue mechanism. (C) 2004 Elsevier B.V. All rights reserved. |
WOS研究方向 | Engineering ; Materials Science |
语种 | 英语 |
WOS记录号 | WOS:000221072600008 |
出版者 | ELSEVIER SCIENCE SA |
源URL | [http://ir.imr.ac.cn/handle/321006/118733] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Lu, SP |
作者单位 | 1.Inha Univ, Dept Mech Engn, Inchon 402751, South Korea 2.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | Lu, SP,Kwon, OY,Kim, TB,et al. Microstructure and wear property of Fe-Mn-Cr-Mo-V alloy cladding by submerged arc welding[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2004,147(2):191-196. |
APA | Lu, SP,Kwon, OY,Kim, TB,&Kim, KH.(2004).Microstructure and wear property of Fe-Mn-Cr-Mo-V alloy cladding by submerged arc welding.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,147(2),191-196. |
MLA | Lu, SP,et al."Microstructure and wear property of Fe-Mn-Cr-Mo-V alloy cladding by submerged arc welding".JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 147.2(2004):191-196. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。