中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
EFFECT OF MICRO-ALLOYING ELEMENT Bi ON SOLIDIFICATION AND MICROSTRUCTURE OF Al-Pb ALLOY

文献类型:期刊论文

作者Sun Qian1,2; Jiang Hongxiang1,2; Zhao Jiuzhou1,2
刊名ACTA METALLURGICA SINICA
出版日期2016-04-11
卷号52期号:4页码:497-504
ISSN号0412-1961
关键词micro-alloying element monotectic alloy interfacial energy solidification microstructure
通讯作者Zhao Jiuzhou(jzzhao@imr.ac.cn)
英文摘要Monotectic alloys are characterized by a miscibility gap in the liquid state. Many of them have great potentials to be used in industry. For example, alloys based on Cu-Pb and Al-Pb are good candidates to be used as advanced bearing materials if the soft Pb phase is dispersed in the Al or Cu matrix. Cu-Cr alloy is a high strength, high conductivity material and Cu-Co alloy is an excellent magneto-resistive material, etc.. However, when a homogeneous monotectic alloy melt is cooled into the miscibility gap, it will transform into two liquids. The liquid-liquid decomposition generally causes the formation of a phase segregated microstructure. In recent years, considerable efforts have been made to investigate the solidification behavior of monotectic alloys. A lot of experiments have been carried out under microgravity conditions in space as well as under the gravitational conditions on the earth. The solidification behaviors of monotectic alloys under the conventional and rapid solidification conditions as well as the effect of external fields, such as electric current, magnetic field etc., are investigated. Models describing the solidification process have been built and the microstructure formations under different conditions have been calculated. It has been demonstrated that the microstructure evolution during cooling an alloy in the miscibility gap is a result of the concurrent actions of the nucleation, growth, Ostwald ripening and motions of the dispersed phase droplets. The nucleation of the dispersed phase droplets has a dominant influence on the solidification microstructure of monotectic alloys. In this work, solidification experiments were carried out to investigate the effect of micro-alloying element Bi on the solidification of Al-Pb alloys. The experimental results demonstrate that micro-alloying element Bi can cause an obvious refinement of the Pb-rich particles. The refining effect increases with the increase of the Pb content of Al-Pb alloys. The affecting mechanism of micro-alloying element Bi on the solidification process of Al-Pb alloys was analyzed. The microstructure formation process was calculated. The numerical results indicate that the addition of micro-alloying element Bi causes a reduction in the interfacial energy between the two liquid phases and, thus, enhances the nucleation rate of the Pb-rich droplets and promotes the formation of Al-Pb alloys with a well-dispersed microstructure.
资助项目National Natural Science Foundation of China[51271185] ; National Natural Science Foundation of China[51471173] ; China Manned Space Engineering[TGJZ800-2-RW024]
WOS研究方向Metallurgy & Metallurgical Engineering
语种英语
出版者SCIENCE PRESS
WOS记录号WOS:000374809600014
资助机构National Natural Science Foundation of China ; China Manned Space Engineering
源URL[http://ir.imr.ac.cn/handle/321006/122080]  
专题金属研究所_中国科学院金属研究所
通讯作者Zhao Jiuzhou
作者单位1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Sun Qian,Jiang Hongxiang,Zhao Jiuzhou. EFFECT OF MICRO-ALLOYING ELEMENT Bi ON SOLIDIFICATION AND MICROSTRUCTURE OF Al-Pb ALLOY[J]. ACTA METALLURGICA SINICA,2016,52(4):497-504.
APA Sun Qian,Jiang Hongxiang,&Zhao Jiuzhou.(2016).EFFECT OF MICRO-ALLOYING ELEMENT Bi ON SOLIDIFICATION AND MICROSTRUCTURE OF Al-Pb ALLOY.ACTA METALLURGICA SINICA,52(4),497-504.
MLA Sun Qian,et al."EFFECT OF MICRO-ALLOYING ELEMENT Bi ON SOLIDIFICATION AND MICROSTRUCTURE OF Al-Pb ALLOY".ACTA METALLURGICA SINICA 52.4(2016):497-504.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。