ADVANCES IN SiC FIBER REINFORCED TITANIUM MATRIX COMPOSITES
文献类型：期刊论文
| 作者 | Wang Yumin; Zhang Guoxing; Zhang Xu; Yang Qing; Yang Lina; Yang Rui |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2016-10-01 |
| 卷号 | 52期号:10页码:1153-1170 |
| 关键词 | titanium matrix composites SiC fiber interfacial reaction non-destructive testing bladed ring |
| ISSN号 | 0412-1961 |
| DOI | 10.11900/0412.1961.2016.00347 |
| 通讯作者 | Yang Rui(ryang@imr.ac.en) |
| 英文摘要 | SiC fibers can be used to reinforce a range of titanium base materials including alloys of the (alpha+beta) type, metastable beta type and near a type, as well intermetallic based gamma-TiAl and orthorhombic Ti2AlNb. Along the fiber directions the obtained composites possess exceptional strength and stiffness, creating a large room and great flexibility for the design of higher performance components to be used in both aero engine and aircraft. The composites can be used by itself such as in sheet and bar form, or as a reinforcing module embedded in titanium alloy components, e.g., as a ring at the rim of a compressor disk. In this paper, recent progress in the development and application of SiC fiber reinforced titanium matrix composites was reviewed, emphasizing the work conducted at the Institute of Metal Research, Chinese Academy of Sciences. Five aspects of research were covered, the first is fiber manufacture and batch production, in which the influence of the chemical vapor deposition parameters on the quality of the W-core SiC fiber was discussed, and the relationship between the tungsten-SiC interface reaction and the high temperature stability of the fiber was described. The second part covers the composite interface, in which a detailed discussion was given to both the chemical and physical compatibility, followed by the design of different reaction layers between the SiC fiber and different titanium based matrixs. The mechanical property section presents tensile data of a range of composites developed in the authors' group and compares to literature reports where available, together with a comprehensive discussion of failure due to fatigue and creep. The fourth part deals with non-destructive testing, presenting new results of inspection on real size composite components using a combination of several techniques including X-ray, industrial CT and ultrasonic scanning. The limitations of each method were shown and the technical challenges were identified. The last part describes the development of structural parts and their verification testing. Titanium matrix composite sheets with [0/90] laminate prepared by both the foil-fiber-foil and matrix coated fiber methods were highlighted, followed by a description of the development of full size bladed ring and excess revolution testing. Future directions of research on SiC fiber reinforced titanium matrix composites were also discussed. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000390080900003 |
| 出版者 | SCIENCE PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/123278]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Yang Rui |
| 作者单位 | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang Yumin,Zhang Guoxing,Zhang Xu,et al. ADVANCES IN SiC FIBER REINFORCED TITANIUM MATRIX COMPOSITES[J]. ACTA METALLURGICA SINICA,2016,52(10):1153-1170. |
| APA | Wang Yumin,Zhang Guoxing,Zhang Xu,Yang Qing,Yang Lina,&Yang Rui.(2016).ADVANCES IN SiC FIBER REINFORCED TITANIUM MATRIX COMPOSITES.ACTA METALLURGICA SINICA,52(10),1153-1170. |
| MLA | Wang Yumin,et al."ADVANCES IN SiC FIBER REINFORCED TITANIUM MATRIX COMPOSITES".ACTA METALLURGICA SINICA 52.10(2016):1153-1170. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。