Preparation of Precursor Fiber for SiC Fiber Reinforced Ni-Cr-Al Alloy Composites
文献类型:期刊论文
作者 | Niu Xixi; Wang Long; Zhang Haoqiang; Shi Nanlin; Gong Jun; Sun Chao |
刊名 | RARE METAL MATERIALS AND ENGINEERING |
出版日期 | 2017-11-01 |
卷号 | 46期号:11页码:3550-3555 |
ISSN号 | 1002-185X |
关键词 | magnetron sputtering SiC fiber composite diffusion barrier coating precursor wire |
通讯作者 | Gong Jun(jgong@imr.ac.cn) |
英文摘要 | SiCf/Ni-Cr-Al precursor wires were obtained by deposition of (Al+Al2O3) diffusion barrier layers and Ni-Cr-Al alloy coating on the surface of SiC fiber via magnetron sputtering. The morphology, composition and phases of the coatings were studied, and the influence of the coatings on the mechanical properties of SiC fiber was investigated. The precursor wires were treated in vacuum at 850 degrees C and 900 degrees C for 150 h. The results show that (Al+Al2O3) coating is uniform and dense, the Al2O3 coating is amorphous, and the composition of Ni-Cr-Al alloy coating is close to that of Ni alloy target. The (Al+Al2O3) layer and Ni-Cr-Al layer combine well with SiC fiber and have extremely slight negative effect on the tensile strength. After heat treatment of the precursor wire in vacuum, the Ni-Cr-Al alloy coating remains intact, and Al2O3 coating effectively blocks the element diffusion and restricts the reaction between SiC fiber and Ni-Cr-Al alloy, which can ensure the preparation of high performance SiCf/Ni-Cr-Al composites. |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
WOS记录号 | WOS:000426020500066 |
源URL | [http://ir.imr.ac.cn/handle/321006/125777] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Gong Jun |
作者单位 | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Niu Xixi,Wang Long,Zhang Haoqiang,et al. Preparation of Precursor Fiber for SiC Fiber Reinforced Ni-Cr-Al Alloy Composites[J]. RARE METAL MATERIALS AND ENGINEERING,2017,46(11):3550-3555. |
APA | Niu Xixi,Wang Long,Zhang Haoqiang,Shi Nanlin,Gong Jun,&Sun Chao.(2017).Preparation of Precursor Fiber for SiC Fiber Reinforced Ni-Cr-Al Alloy Composites.RARE METAL MATERIALS AND ENGINEERING,46(11),3550-3555. |
MLA | Niu Xixi,et al."Preparation of Precursor Fiber for SiC Fiber Reinforced Ni-Cr-Al Alloy Composites".RARE METAL MATERIALS AND ENGINEERING 46.11(2017):3550-3555. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。