Effect of Cooling Rate on Microstructure and Properties of a Cu-Containing Titanium Alloy
文献类型：期刊论文
| 作者 | Peng Cong1,2; Zhang Shuyuan1; Ren Ling1; Yang Ke1 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2017-10-11 |
| 卷号 | 53期号:10页码:1377-1384 |
| 关键词 | Cu-containing titanium alloy microstructure mechanical property corrosion resistance antibacterial property |
| ISSN号 | 0412-1961 |
| DOI | 10.11900/0412.1961.2017.00267 |
| 通讯作者 | Ren Ling(lren@imr.ac.cn) |
| 英文摘要 | The Cu-containing titanium alloy has been proved to possess excellent antibacterial performance, which has great potential for clinical application. In this work, the effect of cooling rate on the microstructure, mechanical properties, corrosion resistance and antibacterial property of a Ti6Al4V-5Cu alloy was investigated. Results showed that the furnace-cooled alloy exhibited the best ductility because of the maximum size and volume fraction of the primary a phase in microstructure. The alloys water quenched from 740 and 820. respectively demonstrated low hardness and yield strength due to the existence of orthorhombic alpha'' phase in microstructure. The alloy quenched at 910 degrees C. showed the highest hardness and tensile strength, but the lowest plasticity because of the presence of acicular hcp alpha' phase. With the increase of heating temperature, the elemental distribution in the alloy became more uniform, and therefore the corrosion resistance increased gradually. However, the cooling rate did not obviously change the antibacterial property of the alloy. The Ti6Al4V-5Cu alloy showed excellent antibacterial property under different cooling rates. |
| 资助项目 | National Natural Science Foundation of China[51631009] ; National Key Research and Development Program of China[2016YFC1100600] ; Youth Innovation Promotion Association, CAS[2014168] ; Natural Science Foundation of Guangdong Province[2015A030312004] ; Natural Science Foundation of Liaoning Province[2015021004] ; Shenyang National Laboratory for Materials Science[2015021004] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000416301400021 |
| 出版者 | SCIENCE PRESS |
| 资助机构 | National Natural Science Foundation of China ; National Key Research and Development Program of China ; Youth Innovation Promotion Association, CAS ; Natural Science Foundation of Guangdong Province ; Natural Science Foundation of Liaoning Province ; Shenyang National Laboratory for Materials Science |
| 源URL | [http://ir.imr.ac.cn/handle/321006/127047]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Ren Ling |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Peng Cong,Zhang Shuyuan,Ren Ling,et al. Effect of Cooling Rate on Microstructure and Properties of a Cu-Containing Titanium Alloy[J]. ACTA METALLURGICA SINICA,2017,53(10):1377-1384. |
| APA | Peng Cong,Zhang Shuyuan,Ren Ling,&Yang Ke.(2017).Effect of Cooling Rate on Microstructure and Properties of a Cu-Containing Titanium Alloy.ACTA METALLURGICA SINICA,53(10),1377-1384. |
| MLA | Peng Cong,et al."Effect of Cooling Rate on Microstructure and Properties of a Cu-Containing Titanium Alloy".ACTA METALLURGICA SINICA 53.10(2017):1377-1384. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。