A smooth tool path generation and real-time interpolation algorithm based on B-spline curves
文献类型：期刊论文
| 作者 | Sun, Shujie1; Yu, Dong2,3; Wang, Changhui1; Xie, Chuanning1 |
| 刊名 | ADVANCES IN MECHANICAL ENGINEERING
 |
| 出版日期 | 2018-01-18 |
| 卷号 | 10期号:1页码:14 |
| 关键词 | Spline fitting corner curve transition look-ahead interpolation interpolation point calculation |
| ISSN号 | 1687-8140 |
| DOI | 10.1177/1687814017750281 |
| 通讯作者 | Sun, Shujie(sunshujie@sict.ac.cn) |
| 英文摘要 | In the machining progress of free-form surface, tool path is presented as continuous small line segments. To achieve high machining speed and fine machining quality, the tool path needs to be smoothed. This study presents a smooth tool path generation algorithm based on B-spline curves for small line segments machining. The algorithm includes two modules: smooth tool path generation module and real-time look-ahead interpolation module. In the smooth tool path generation module, the tool path is divided into non-fitting regions and fitting regions by three conditions: the length of small line segments, the angle of adjacent small line segments, and the change rate of the length and angle. To control contour error and get fine machining quality, the fitting regions are corrected by circle correction method and fitted into B-spline curves, while the non-fitting regions are smoothed with B-spline curves. In this module, the gained tool path has continuous curvature. In the interpolation module, the seven-phase jerk-limited look-ahead planning is adopted to generate smooth machining velocity, while the calculation accuracy of interpolation point generated by the interpolation period crossing two adjacent tool path is controlled. Simulations and experimental results demonstrate that the proposed algorithm is able to reduce the amount of numerical control codes, achieve high machining speed, and improve machining quality. |
| 资助项目 | Project of Shandong Province Higher Educational Science and Technology Program[J17KA038] ; High-End CNC Machine Tools and Basic Manufacturing Equipment, National Science and Technology Major Projects[2016ZX04004006] |
| WOS研究方向 | Thermodynamics ; Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000422909000001 |
| 出版者 | SAGE PUBLICATIONS LTD |
| 资助机构 | Project of Shandong Province Higher Educational Science and Technology Program ; High-End CNC Machine Tools and Basic Manufacturing Equipment, National Science and Technology Major Projects |
| 源URL | [http://ir.imr.ac.cn/handle/321006/127256]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Sun, Shujie |
| 作者单位 | 1.Yantai Univ, Sch Electromech & Automot Engn, 30,Qingquan Rd, Yantai 264005, Shandong, Peoples R China 2.Chinese Acad Sci, Natl Engn Res Ctr High End CNC, Shenyang Inst Comp Technol, Shenyang, Liaoning, Peoples R China 3.Shenyang Golding NC Tech Co Ltd, Shenyang, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Sun, Shujie,Yu, Dong,Wang, Changhui,et al. A smooth tool path generation and real-time interpolation algorithm based on B-spline curves[J]. ADVANCES IN MECHANICAL ENGINEERING,2018,10(1):14. |
| APA | Sun, Shujie,Yu, Dong,Wang, Changhui,&Xie, Chuanning.(2018).A smooth tool path generation and real-time interpolation algorithm based on B-spline curves.ADVANCES IN MECHANICAL ENGINEERING,10(1),14. |
| MLA | Sun, Shujie,et al."A smooth tool path generation and real-time interpolation algorithm based on B-spline curves".ADVANCES IN MECHANICAL ENGINEERING 10.1(2018):14. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。