Influence of Scandium Addition on Stress Corrosion Cracking Susceptibility of Al-Zn-Mg Alloy in Different Corrosive Environments
文献类型：期刊论文
| 作者 | Li, Zhaoming1,2; Jiang, Haichang1; Yan, Desheng1; Rong, Lijian1 |
| 刊名 | METALS
 |
| 出版日期 | 2018-04-01 |
| 卷号 | 8期号:4页码:12 |
| 关键词 | Al-Zn-Mg alloy solution pH strain rate stress corrosion cracking susceptibility |
| ISSN号 | 2075-4701 |
| DOI | 10.3390/met8040225 |
| 通讯作者 | Jiang, Haichang(hcjiang@imr.ac.cn) ; Rong, Lijian(ljrong@imr.ac.cn) |
| 英文摘要 | Stress corrosion cracking (SCC) susceptibilities of Al-Zn-Mg alloys without and with Scandium addition were evaluated in 3.5% NaCl solution at different pH and different strain rate, using slow strain rate test technique. The results indicate that Sc addition reduces grain size and width of precipitation free zones, and transforms grain boundary precipitates from continuous distribution into interrupted distribution by inhibiting recrystallization. In solution at pH 1, pH 3 and pH 7, Sc addition reduces the degree of localized corrosion of alloy surface and SCC susceptibility of Al-Zn-Mg alloy. However, in solution at pH 10 and pH 12, grain refinement significantly promotes the diffusion of hydrogen atoms into matrix, thus Sc addition increases SCC susceptibility of Al-Zn-Mg alloy. Under different strain rate conditions, Sc addition can all reduce SCC susceptibility of Al-Zn-Mg alloy in solution at pH 1, pH 3 and pH 7, and can all increase SCC susceptibility of Al-Zn-Mg alloy in solution at pH 10 and pH 12. As a result, Sc modified Al-Zn-Mg alloy in practical applications should be avoided in alkaline environments. |
| 资助项目 | State's Key Project of Research and Development[2016YFB1200600] ; Strategic Priority Program of the Chinese Academy of Sciences[XDB22000000] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000434882800028 |
| 出版者 | MDPI |
| 资助机构 | State's Key Project of Research and Development ; Strategic Priority Program of the Chinese Academy of Sciences |
| 源URL | [http://ir.imr.ac.cn/handle/321006/128570]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Jiang, Haichang; Rong, Lijian |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 2.Univ Chinese Acad Sci, 19 Yuquan Rd, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Zhaoming,Jiang, Haichang,Yan, Desheng,et al. Influence of Scandium Addition on Stress Corrosion Cracking Susceptibility of Al-Zn-Mg Alloy in Different Corrosive Environments[J]. METALS,2018,8(4):12. |
| APA | Li, Zhaoming,Jiang, Haichang,Yan, Desheng,&Rong, Lijian.(2018).Influence of Scandium Addition on Stress Corrosion Cracking Susceptibility of Al-Zn-Mg Alloy in Different Corrosive Environments.METALS,8(4),12. |
| MLA | Li, Zhaoming,et al."Influence of Scandium Addition on Stress Corrosion Cracking Susceptibility of Al-Zn-Mg Alloy in Different Corrosive Environments".METALS 8.4(2018):12. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。