Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades
文献类型：期刊论文
| 作者 | Xue, Weihai1; Gao, Siyang1; Duan, Deli1; Zhang, Jiaping2; Liu, Yang1; Li, Shu1 |
| 刊名 | WEAR
 |
| 出版日期 | 2018-09-15 |
| 卷号 | 410页码:25-33 |
| ISSN号 | 0043-1648 |
| 关键词 | Aero engine High-speed rubbing Seal coating Blade material Thermal property |
| DOI | 10.1016/j.wear.2018.06.003 |
| 通讯作者 | Duan, Deli(duandl@imr.ac.cn) |
| 英文摘要 | Abradable seal coatings have been widely used in aero-engine to reduce gas path clearance. Research has been performed to evaluate the abradability of the seal coating. In addition, the high-speed rubbing test rig has been employed to simulate the interaction between the seal coating and blade. However, almost all previous studies tested blades made of one type of material. In real engines, the blade material for a seal coating is changeable. In this work, blades made of different titanium alloys were tested and rubbed against the same Al-hBN seal coating. Macro-morphology and micro-morphology observations with scanning electron microscopy (SEM) were employed to examine the wear behavior of the blade-coating couple. The results indicated that the Ti6Al4V blade exhibited the most severe coating adhesions and almost no blade wear; the Ti-8Al-1Mo-1V blade experienced less coating adhesions; and the Ti-5Al-2Sn-2Zr-4Cr-4Mo blade exhibited the least coating adhesions. The mechanical strengths at room and high temperatures and the rub performances during the single pendulum scratch test were checked to find the relationship between the mechanical properties and high-speed rub performances. Unfortunately, high mechanical strength did not appear to guarantee the absence of blade wear, and the thermal properties of the different materials blades were identified as the main reason for the different wear behaviors. |
| 资助项目 | National Natural Science Foundation of China[50675215] ; Tribology Science Fund of State Key Laboratory of Tribology[SKLTKF15B09] ; Innovation Foundation of China Aviation Industry Corp.[2010E41018] |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCIENCE SA |
| WOS记录号 | WOS:000440030600003 |
| 资助机构 | National Natural Science Foundation of China ; Tribology Science Fund of State Key Laboratory of Tribology ; Innovation Foundation of China Aviation Industry Corp. |
| 源URL | [http://ir.imr.ac.cn/handle/321006/128927]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Duan, Deli |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Liming Aero Engine Grp Corp, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Xue, Weihai,Gao, Siyang,Duan, Deli,et al. Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades[J]. WEAR,2018,410:25-33. |
| APA | Xue, Weihai,Gao, Siyang,Duan, Deli,Zhang, Jiaping,Liu, Yang,&Li, Shu.(2018).Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades.WEAR,410,25-33. |
| MLA | Xue, Weihai,et al."Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades".WEAR 410(2018):25-33. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。