Progress in Hot Isostatic Pressing Technology of Titanium Alloy Powder
文献类型：期刊论文
| 作者 | Xu Lei; Guo Ruipeng; Wu Jie; Lu Zhengguan; Yang Rui |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2018-11-11 |
| 卷号 | 54期号:11页码:1537-1552 |
| 关键词 | titanium alloy powder metallurgy hydrogen pump impeller hot isostatic pressing near net shape forming |
| ISSN号 | 0412-1961 |
| DOI | 10.11900/0412.1961.2018.00360 |
| 通讯作者 | Xu Lei(lxu@imr.ac.cn) |
| 英文摘要 | The research status and application of powder metallurgy (PM) titanium alloys in connection with near net shape forming technology using hot isostatic pressing (HIP) are reviewed in this paper. A brief summary of historic developments with production of clean prealloyed powder and the use of computer simulation techniques in powder densification as important milestones is presented first. The bulk of the paper is concerned with progress made in the last 15 years, especially in the last decade, citing examples from the authors' group. Four types of alloys are covered: a cryogenic titanium alloy, Ti-5Al-2.5Sn with extra-low interstitial (ELI), which is used to make impeller for hydrogen pump of rocket engine, a high temperature titanium alloy Ti55, which is intended for long term service at 550 degrees C in engine applications, and two Ti-Al based intermetallic compounds including both gamma-TiAl and an orthorhombic alloy based on Ti2AlNb. Comparisons in mechanical property were made between the PM alloys and their wrought and cast versions wherever possible. Key issues influencing densification, such as powder size segregation and gas pores in large powders, variation in powder surface oxygen content with powder store time, oxygen layer on gamma-TiAl powder surface due to abnormally high fraction of the alpha(2)-Ti3Al phase as a result of rapid solidification of the powder, were discussed. The final section is dedicated to finite element modelling of powder densification, taking into account such factors as tooling design and stress shielding effect during HIPing. Future research directions are suggested in the summary section. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000447845000008 |
| 出版者 | SCIENCE PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/129996]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Xu Lei |
| 作者单位 | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Xu Lei,Guo Ruipeng,Wu Jie,et al. Progress in Hot Isostatic Pressing Technology of Titanium Alloy Powder[J]. ACTA METALLURGICA SINICA,2018,54(11):1537-1552. |
| APA | Xu Lei,Guo Ruipeng,Wu Jie,Lu Zhengguan,&Yang Rui.(2018).Progress in Hot Isostatic Pressing Technology of Titanium Alloy Powder.ACTA METALLURGICA SINICA,54(11),1537-1552. |
| MLA | Xu Lei,et al."Progress in Hot Isostatic Pressing Technology of Titanium Alloy Powder".ACTA METALLURGICA SINICA 54.11(2018):1537-1552. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。