Design of single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements for nuclear power plant application
文献类型：期刊论文
| 作者 | Xiang, C.1,2; Han, E-H2; Zhang, Z. M.2; Fu, H. M.3; Wang, J. Q.2; Zhang, H. F.3; Hu, G. D.3,4 |
| 刊名 | INTERMETALLICS
 |
| 出版日期 | 2019 |
| 卷号 | 104页码:143-153 |
| 关键词 | High-entropy alloys Alloy design Mechanical properties Nuclear power plant Accident tolerant fuel |
| ISSN号 | 0966-9795 |
| DOI | 10.1016/j.intermet.2018.11.001 |
| 通讯作者 | Han, E-H(ehhan@imr.ac.cn) |
| 英文摘要 | Two quinary high-entropy alloys MoNbCrVTi and MoNbCrZrTi were designed and prepared for the two following goals. The first goal is to search for single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements, and the second goal is to verify the validity of the empirical parameters calculation and CALPHAD (acronym of CALculation of PHAse Diagrams) calculation in the initiatory selection process of desired alloys from numerous candidates. The density, hardness, microstructure, and compressive mechanical properties of the two alloys were preliminarily investigated, and the phase formation of these two alloys was also discussed. The MoNbCrVTi alloy consists of a single BCC phase with typical dendritic microstructure, while the MoNbCrZrTi alloy mainly consists of a BCC phase plus a C15 Laves phase. The densities of the as-cast MoNbCrVTi and MoNbCrZrTi alloys were determined to be 7.30 +/- 0.01 and 7.33 +/- 0.01 g/cm(3), respectively. The MoNbCrVTi alloy exhibits a hardness of 494.4 +/- 7.7 Hv, a high yield strength of 1281 MPa and a fracture strain of 9.4% at room temperature. By comparison, the MoNbCrZrTi alloy exhibits a hardness of 552.9 +/- 8.6 Hv, a higher yield strength of 1454 MPa but a lower fracture strain of 2.7%. The proposed two goals are basically achieved based on the preliminary results. |
| 资助项目 | Chinese Academy of Sciences[ZDRW-CN-2017-1] |
| WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000454465800018 |
| 出版者 | ELSEVIER SCI LTD |
| 资助机构 | Chinese Academy of Sciences |
| 源URL | [http://ir.imr.ac.cn/handle/321006/130991]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Han, E-H |
| 作者单位 | 1.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Liaoning, Peoples R China 4.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Xiang, C.,Han, E-H,Zhang, Z. M.,et al. Design of single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements for nuclear power plant application[J]. INTERMETALLICS,2019,104:143-153. |
| APA | Xiang, C..,Han, E-H.,Zhang, Z. M..,Fu, H. M..,Wang, J. Q..,...&Hu, G. D..(2019).Design of single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements for nuclear power plant application.INTERMETALLICS,104,143-153. |
| MLA | Xiang, C.,et al."Design of single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements for nuclear power plant application".INTERMETALLICS 104(2019):143-153. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。