中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Thermal Stability of WB2 and W-B-N Films Deposited by Magnetron Sputtering

文献类型:期刊论文

作者Liu, Yan-Ming1; Li, Tong1; Liu, Feng1; Pei, Zhi-Liang2
刊名ACTA METALLURGICA SINICA-ENGLISH LETTERS
出版日期2019
卷号32期号:1页码:136-144
关键词AlB2-type WB2 films W-B-N films Magnetron sputtering Thermal stability Mechanical properties
ISSN号1006-7191
DOI10.1007/s40195-018-0864-8
通讯作者Pei, Zhi-Liang(zlpei@imr.ac.cn)
英文摘要The work is mainly to study the thermal stability including the phase stability, microstructure and tribo-mechanical properties of the AlB2-type WB2 and W-B-N (5.6at.% N) films annealed in vacuum at various temperatures, which are deposited on Si and GY8 substrates by magnetron sputtering. For the WB2 and W-B-N films deposited on Si wafers, as the annealing temperature increases from 700 to 1000 degrees C, a-WB (700 degrees C) and Mo2B5-type WB2 (1000 degrees C) are successively observed in the AlB2-type WB2 films, which show many cracks at the temperature 800 degrees C resulting in the performance failure; by contrast, only slight -WB is observed at 1000 degrees C in the W-B-N films due to the stabilization effect of a-BN phase, and the hardness increases to 34.1GPa first due to the improved crystallinity and then decreases to 31.5GPa ascribed to the formation of -WB. For the WB2 and the W-B-N films deposited on WC-Co substrates, both the WB2 and W-B-N films react with the YG8 (WC-Co) substrates leading to the formation of CoWB, CoW2B2 and CoW3B3 with the annealing temperature increasing to 900 degrees C; a large number of linear cracks occur on the surface of these two films annealed at 800 degrees C leading to the film failure; after vacuum annealing at 700 degrees C, the friction performance of the W-B-N films is higher than that of the deposited W-B-N films, while the wear resistance of the WB2 films shows a slight decrease compared with that of the deposited WB2 films.
资助项目National Natural Science Foundation of China[51701157] ; National Natural Science Foundation of China[51505378] ; Natural Science Foundation of Shaanxi Province of China[2017JQ5031]
WOS研究方向Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:000455515500014
出版者CHINESE ACAD SCIENCES, INST METAL RESEARCH
资助机构National Natural Science Foundation of China ; Natural Science Foundation of Shaanxi Province of China
源URL[http://ir.imr.ac.cn/handle/321006/131260]  
专题金属研究所_中国科学院金属研究所
通讯作者Pei, Zhi-Liang
作者单位1.Xian Shiyou Univ, Coll Mat Sci & Engn, Xian 710065, Shaanxi, Peoples R China
2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China
推荐引用方式
GB/T 7714
Liu, Yan-Ming,Li, Tong,Liu, Feng,et al. Thermal Stability of WB2 and W-B-N Films Deposited by Magnetron Sputtering[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2019,32(1):136-144.
APA Liu, Yan-Ming,Li, Tong,Liu, Feng,&Pei, Zhi-Liang.(2019).Thermal Stability of WB2 and W-B-N Films Deposited by Magnetron Sputtering.ACTA METALLURGICA SINICA-ENGLISH LETTERS,32(1),136-144.
MLA Liu, Yan-Ming,et al."Thermal Stability of WB2 and W-B-N Films Deposited by Magnetron Sputtering".ACTA METALLURGICA SINICA-ENGLISH LETTERS 32.1(2019):136-144.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。