C and Mn Elements Characterization and Stability of Retained Austenite in Different Locations of Quenching and Partitioning Bainite Steels
文献类型：期刊论文
| 作者 | Tian Yaqiang1; Tian Geng1; Zheng Xiaoping1; Chen Liansheng1; Xu Yong1,2; Zhang Shihong2 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2019-03-11 |
| 卷号 | 55期号:3页码:332-340 |
| 关键词 | quenching and partitioning bainitic steel retained austenite in different locations C and Mn elements distribution stability of retained austenite TRIP effect |
| ISSN号 | 0412-1961 |
| DOI | 10.11900/0412.1961.2018.00270 |
| 通讯作者 | Chen Liansheng(kyckfk@ucst.edu.cn) |
| 英文摘要 | The volume fraction and stability of retained austenite play an important role in the performance of low carbon steels, while the C and Mn elements have a stabilizing effect on the thermal stability and mechanical stability of retained austenite. Therefore, the C and Mn elementals partitioning was promoted by intercritical annealing. As a result, the mechanical properties of the low carbon steels are improved. The microstructure of quenching and partitioning bainitic steels and retained austenite characteristics were studied by means of SEM, TEM and XRD. The partitioning and content of C and Mn elements in retained austenite at different locations were characterized by EPMA, EBSD and nanoindentation. The effect of C and Mn elements on the stability of retained austenite at different locations and phase change law of retained austenite were investigated by combining the tensile stress-strain curves under the treatment of intercritical annealing (partial austenitizing)-quenching and partitioning in the bainitic region process (IQ&PB). In the process of tensile deformation, the transformation induced plasticity (TRIP) effect occurs, the volume of retained austenite decreases, the transformation takes place preferentially in the ferrite grain boundary, and finally occurs between the bainite laths. C and Mn elements have a stabilizing effect on the retained austenite, which make retained austenite is not prone to phase change. The stress at the tensile fracture is concentrated, and the retained austenite is completely transformed into martensite. The volume fraction of retained austenite is 3.12% and 5.03% at 2 mm and 4 mm distances away from the fracture. Film-like retained austenite is more stable than blocky retained austenite, and the retained austenite of the <111>(gamma) crystal orientation is unstable and easily transforms into martensite. |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000457467900005 |
| 出版者 | SCIENCE PRESS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/131769]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Chen Liansheng |
| 作者单位 | 1.North China Univ Sci & Technol, Minist Educ Modern Met Technol, Key Lab, Tangshan 063210, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Tian Yaqiang,Tian Geng,Zheng Xiaoping,et al. C and Mn Elements Characterization and Stability of Retained Austenite in Different Locations of Quenching and Partitioning Bainite Steels[J]. ACTA METALLURGICA SINICA,2019,55(3):332-340. |
| APA | Tian Yaqiang,Tian Geng,Zheng Xiaoping,Chen Liansheng,Xu Yong,&Zhang Shihong.(2019).C and Mn Elements Characterization and Stability of Retained Austenite in Different Locations of Quenching and Partitioning Bainite Steels.ACTA METALLURGICA SINICA,55(3),332-340. |
| MLA | Tian Yaqiang,et al."C and Mn Elements Characterization and Stability of Retained Austenite in Different Locations of Quenching and Partitioning Bainite Steels".ACTA METALLURGICA SINICA 55.3(2019):332-340. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。