Incremental forming characteristics of hollow parts with grooves
文献类型：期刊论文
| 作者 | Guo, Xunzhong1,2; Wang, Cheng1,2; Xu, Yong3,4; Abd El-Aty, Ali3; Zhang, Shi-Hong3 |
| 刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| 出版日期 | 2019-05-01 |
| 卷号 | 102期号:1-4页码:829-837 |
| 关键词 | Incremental forming Tubular parts Grooves Simulation |
| ISSN号 | 0268-3768 |
| DOI | 10.1007/s00170-018-3201-5 |
| 通讯作者 | Xu, Yong(yxu@imr.ac.cn) |
| 英文摘要 | Incremental profile forming (IPF) is a new plastic processing technology developed in recent years. The new profile manufacturing technology is mainly used to produce tubular parts with variable cross sections along the axis of tube. The parts with different cross sections produced by this technology satisfy the lightweight and high strength requirements of the tubular parts. The IPF method is very flexible and can form diverse complex-shaped parts. Because no special machine is available for this technology, depending on the shapes of formed tubular parts, the forming tool and forming method should be designed. Thus, this study proposes a new method to form the annular groove and tube wall groove. Using a special tool and servo drive system of spinning machine, it is possible to form an annular groove and tube wall groove on the surface of tubular part. This is a typical IPF method for tubes. The process of different grooves on the surface of tubes was systematically studied in this paper. Through experiments and finite element simulations, different process parameters influencing the forming quality of groove were studied. It was concluded that the tool's single feed and spindle speed significantly affect the forming quality and forming limit. |
| 资助项目 | Fundamental Research Funds for the Central Universities[NS2016059] |
| WOS研究方向 | Automation & Control Systems ; Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000463670200065 |
| 出版者 | SPRINGER LONDON LTD |
| 资助机构 | Fundamental Research Funds for the Central Universities |
| 源URL | [http://ir.imr.ac.cn/handle/321006/132717]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Xu, Yong |
| 作者单位 | 1.Nanjing Univ Aeronaut & Astronaut, Jiangsu Key Lab Nucl Energy Equipment Mat Engn, Nanjing 211100, Jiangsu, Peoples R China 2.Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211100, Jiangsu, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 4.Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nano & Heterogeneous Mat Ctr, Nanjing 210094, Jiangsu, Peoples R China |
| 推荐引用方式 GB/T 7714 | Guo, Xunzhong,Wang, Cheng,Xu, Yong,et al. Incremental forming characteristics of hollow parts with grooves[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,102(1-4):829-837. |
| APA | Guo, Xunzhong,Wang, Cheng,Xu, Yong,Abd El-Aty, Ali,&Zhang, Shi-Hong.(2019).Incremental forming characteristics of hollow parts with grooves.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,102(1-4),829-837. |
| MLA | Guo, Xunzhong,et al."Incremental forming characteristics of hollow parts with grooves".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 102.1-4(2019):829-837. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。