Theoretical Calculation and Simulation Analysis of Axial Static Stiffness of Double-Nut Ball Screw with Heavy Load and High Precision
文献类型：期刊论文
| 作者 | Luo, Haitao1,2; Fu, Jia1,2; Jiao, Lichuang1,2; Zhao, Fengqun3 |
| 刊名 | MATHEMATICAL PROBLEMS IN ENGINEERING
 |
| 出版日期 | 2019 |
| 页码 | 11 |
| ISSN号 | 1024-123X |
| DOI | 10.1155/2019/9608794 |
| 通讯作者 | Luo, Haitao(luohaitao@sia.cn) |
| 英文摘要 | Double-nut ball screws bear the action of bidirectional pretightening force, leading to the deformation of the contact area between the ball and the raceway. Under this condition, it is important to analyze and calculate the static stiffness of the ball screw. However, the conventional calculation method is inaccurate. Hence, a new method for the static stiffness analysis of a double-nut ball screw is proposed. Through the structural analysis of the ball screw and internal load distribution, a load deformation model was established based on the Hertzian contact theory. Through the load analysis of the ball screw, a static stiffness model of the ball screw was established and applied to a case study and a finite element simulation. The rigidity of THK double-nut ball screws used in the X-axis feed system of a high-stiffness heavy-duty friction stir welding robot (developed by the research group) was calculated. When the workload was lower than 1.1 x 10(4) N, the slope of the double-nut static stiffness curve increased significantly with the increase in the workload, and when the workload was greater than 1.1 x 10(4) N, its upward slope tended to stabilize. The simulated and experimental stiffness curves were in good agreement; when the external axial load was greater than 2.8 x 10(4) N, the stiffness value calculated using the finite element method gradually converged to the theoretical value; and when the axial load reached 3.0 x 10(4) N, the simulation and test curves matched well. The analysis method of the double-nut ball screw was found to be concise and accurate, and the stiffness curves calculated using the two methods were consistent. The simulation analysis of the static stiffness presented herein is expected to aid the design of double-nut ball screws of high-rigidity heavy-duty equipment. |
| 资助项目 | National Natural Science Foundation of China[51505470] ; State Key Laboratory of Robotics ; Youth Innovation Promotion Association, CAS[2018237] ; Jiang Xinsong Innovation Fund |
| WOS研究方向 | Engineering ; Mathematics |
| 语种 | 英语 |
| WOS记录号 | WOS:000474546300001 |
| 出版者 | HINDAWI LTD |
| 资助机构 | National Natural Science Foundation of China ; State Key Laboratory of Robotics ; Youth Innovation Promotion Association, CAS ; Jiang Xinsong Innovation Fund |
| 源URL | [http://ir.imr.ac.cn/handle/321006/134289]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Luo, Haitao |
| 作者单位 | 1.Chinese Acad Sci, Inst Robot & Intelligent Mfg, Shenyang, Liaoning, Peoples R China 2.Chinese Acad Sci, Shenyang Inst Automat, State Key Lab Robot, Shenyang, Liaoning, Peoples R China 3.Shenyang Ligong Univ, Sch Mech Engn, Shenyang, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Luo, Haitao,Fu, Jia,Jiao, Lichuang,et al. Theoretical Calculation and Simulation Analysis of Axial Static Stiffness of Double-Nut Ball Screw with Heavy Load and High Precision[J]. MATHEMATICAL PROBLEMS IN ENGINEERING,2019:11. |
| APA | Luo, Haitao,Fu, Jia,Jiao, Lichuang,&Zhao, Fengqun.(2019).Theoretical Calculation and Simulation Analysis of Axial Static Stiffness of Double-Nut Ball Screw with Heavy Load and High Precision.MATHEMATICAL PROBLEMS IN ENGINEERING,11. |
| MLA | Luo, Haitao,et al."Theoretical Calculation and Simulation Analysis of Axial Static Stiffness of Double-Nut Ball Screw with Heavy Load and High Precision".MATHEMATICAL PROBLEMS IN ENGINEERING (2019):11. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。