Creep anisotropy of a 3rd generation nickel-base single crystal superalloy at 850 degrees C
文献类型：期刊论文
| 作者 | Li, Yifei1,2; Wang, Li2; Zhang, Gong2; Zhang, Jian2; Lou, Langhong2 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2019-07-08 |
| 卷号 | 760页码:26-36 |
| 关键词 | Nickel base superalloy Creep Anisotropy Microstructure Dislocation |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2019.05.075 |
| 通讯作者 | Wang, Li(wangli@imr.ac.cn) |
| 英文摘要 | The influence of orientation on the creep behaviors of a 3rd generation single crystal superalloy was studied at 850 degrees C. It is found that the creep properties are highly anisotropic for [001], [011] and [111] specimens. The [111] samples show the longest creep life. The [011] specimens display the shortest creep life of less than 1 h and the longest elongation. And [001] specimens exhibit the intermediate creep life. Electron backscattered diffraction (EBSD) analyses and transmission electron microscopy (TEM) observations show that the creep anisotropy is mainly related to the slip systems that activated, especially the < 112 > {111} slip systems. Single slip of < 112 > {111} system results in a high creep strain and poor property, which controls the primary creep of [001] and entire creep stage of [011] specimens. While interaction of primary and secondary < 112 > {111} systems has an effect on work hardening, which occurs during steady and tertiary creep of [111] orientation and hence results in the best creep property of [111] specimens. By comparing with SRR99 and CMSX-4 alloys, higher Re content in DD33 alloy may facilitate the formation of continuous stacking faults in [011] specimens and activation of multiple < 112 > {111} slip systems in [111] specimens, which will affect the creep property and anisotropy. |
| 资助项目 | National Natural Science Foundation of China[51871210] ; National Natural Science Foundation of China[51671196] ; National Natural Science Foundation of China[51631008] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000474501200004 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/134476]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, Li |
| 作者单位 | 1.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Superalloys Div, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Yifei,Wang, Li,Zhang, Gong,et al. Creep anisotropy of a 3rd generation nickel-base single crystal superalloy at 850 degrees C[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2019,760:26-36. |
| APA | Li, Yifei,Wang, Li,Zhang, Gong,Zhang, Jian,&Lou, Langhong.(2019).Creep anisotropy of a 3rd generation nickel-base single crystal superalloy at 850 degrees C.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,760,26-36. |
| MLA | Li, Yifei,et al."Creep anisotropy of a 3rd generation nickel-base single crystal superalloy at 850 degrees C".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 760(2019):26-36. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。