The effect of three-dimensional loading and texture on deformation mechanism of Zircaloy-4 alloy: Using space Schmid factor model
文献类型：期刊论文
| 作者 | Zhang, Yingdong1,2; Li, Geping1; Liu, Chengze1,2; Yuan, Fusen1,2; Han, Fuzhou1,2; Ali, Muhammad1,2; Guo, Wenbin1,2; Gu, Hengfei1,3 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2019-07-22 |
| 卷号 | 761页码:11 |
| 关键词 | Zircaloy-4 alloy Three-dimensional loading Space Schmid factor model Deformation mechanism |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2019.06.002 |
| 通讯作者 | Li, Geping(gpli@imr.ac.cn) |
| 英文摘要 | The effect of three-dimensional loading and texture on deformation behavior (including basal < a > , prismatic < a > , pyramidal < a > , first and second order pyramidal < a + c > slips, tensile and compression twins) of Zircaloy-4 alloy sheet was systematically investigated using a new model:space Schmid factor model (SSFM). The SSFM was correlated with the results as calculated by EBSD technique. The results of compression tests and EBSD showed that yield strength was depended upon the orientation of the crystal and decreased in the sequence: TD > RD-35 degrees > RD. Then, analysis of relationship between the loading direction and yielding anisotropy of the Zr-4 sheet revealed that the predominant deformation mode of the Zr-4 sheet was pyramidal < a + c > slip when compressed along the transverse direction (TD) and prismatic < a > slip when compressed either along the rolling direction (RD) or 35 degrees away from the rolling direction (RD-35 degrees). Besides this, a few {10 (1) over bar2} < <(1)over bar>011 > tensile twins (TT) were exclusively observed in each case. However, the TT get activated easily in RD compression as compared to the other two directions. In general, the SSFM provided a well-substantiated explanation of the deformation mechanisms of the Zr-4 alloy sheet under different loading directions. |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000477784900025 |
| 出版者 | ELSEVIER SCIENCE SA |
| 源URL | [http://ir.imr.ac.cn/handle/321006/134604]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Geping |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, 96 JinZhai Rd, Hefei 230026, Anhui, Peoples R China 3.Univ Chinese Acad Sci, 19 Yuquan Rd, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Yingdong,Li, Geping,Liu, Chengze,et al. The effect of three-dimensional loading and texture on deformation mechanism of Zircaloy-4 alloy: Using space Schmid factor model[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2019,761:11. |
| APA | Zhang, Yingdong.,Li, Geping.,Liu, Chengze.,Yuan, Fusen.,Han, Fuzhou.,...&Gu, Hengfei.(2019).The effect of three-dimensional loading and texture on deformation mechanism of Zircaloy-4 alloy: Using space Schmid factor model.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,761,11. |
| MLA | Zhang, Yingdong,et al."The effect of three-dimensional loading and texture on deformation mechanism of Zircaloy-4 alloy: Using space Schmid factor model".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 761(2019):11. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。