Effect of compaction pressure on the densification, microstructure, and mechanical properties of Ti-1Al-8V-5Fe alloy based on TiH2 and HDH-Ti powders
文献类型：期刊论文
| 作者 | Zhang, Yanan1; Guo, Xing2,3; Chen, Yungui4; Li, Qiangguo5 |
| 刊名 | MICRO & NANO LETTERS
 |
| 出版日期 | 2019-07-24 |
| 卷号 | 14期号:8页码:906-910 |
| 关键词 | vanadium alloys hardness titanium powders iron alloys X-ray diffraction sintering crystal microstructure yield strength densification compaction aluminium alloys scanning electron microscopy titanium alloys titanium compounds mass spectroscopic chemical analysis hardness testing compressibility compaction pressure sintered density microstructural evolution mechanical properties densification dehydrogenation characteristics TG-MS O N analysers scanning electron microscopy TiAlVFe-Ti TiAlVFe-TiH2 yield strength self-cleaning ability compressibility alpha-phase volume fraction hardness tester electro-universal tester X-ray diffraction |
| DOI | 10.1049/mnl.2018.5736 |
| 通讯作者 | Guo, Xing(xguo15b@imr.ac.cn) ; Chen, Yungui(zyngx2009@aliyun.com) |
| 英文摘要 | The high-strength of Ti-1Al-8V-5Fe (Ti-185) alloy is due to TiH2 powders produced at different compaction pressures and compared with hydride-dehydride-Ti powders. The objective of this work was to investigate the microstructural evolution and mechanical properties of Ti-185 alloy under different compaction pressures. The dehydrogenation characteristics of TiH2-185 and the oxygen contents of sintered samples were evaluated by thermogravimetric analysis and mass spectrometer (TG-MS) and oxygen/nitrogen (O/N) analysers. The corresponding microstructural evolution and change in mechanical properties were analysed by means of scanning electron microscopy, X-ray diffraction, electro-universal tester, and hardness tester, respectively. Results show that with the increase in compaction pressure, the green and sintered density and densification rates increase, but the volume fraction of alpha-phase decreases. The TiH2-185 samples have higher densification and sintered density, lower oxygen content than Ti-185 samples, which is attributed to its better compressibility and superior self-cleaning ability as well as more water produced. In addition, the sintered TiH2-185 samples exhibit higher yield strength and hardness in comparison with the sintered Ti-185 samples. The enhanced mechanical properties are attributed to its higher density and less soft alpha-phase in the microstructure. |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science |
| 语种 | 英语 |
| 出版者 | INST ENGINEERING TECHNOLOGY-IET |
| WOS记录号 | WOS:000482156500020 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/134910]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Guo, Xing; Chen, Yungui |
| 作者单位 | 1.Xian Aeronaut Univ, Sch Mat Engn, Xian 710077, Shaanxi, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China 4.Sichuan Univ, Coll Mat Sci & Engn, Chengdu 610065, Sichuan, Peoples R China 5.Xian Polytech Univ, Sch Mat Sci & Engn, Xian 710048, Shaanxi, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Yanan,Guo, Xing,Chen, Yungui,et al. Effect of compaction pressure on the densification, microstructure, and mechanical properties of Ti-1Al-8V-5Fe alloy based on TiH2 and HDH-Ti powders[J]. MICRO & NANO LETTERS,2019,14(8):906-910. |
| APA | Zhang, Yanan,Guo, Xing,Chen, Yungui,&Li, Qiangguo.(2019).Effect of compaction pressure on the densification, microstructure, and mechanical properties of Ti-1Al-8V-5Fe alloy based on TiH2 and HDH-Ti powders.MICRO & NANO LETTERS,14(8),906-910. |
| MLA | Zhang, Yanan,et al."Effect of compaction pressure on the densification, microstructure, and mechanical properties of Ti-1Al-8V-5Fe alloy based on TiH2 and HDH-Ti powders".MICRO & NANO LETTERS 14.8(2019):906-910. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。