Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel
文献类型：期刊论文
| 作者 | Shen, Jingjie1; Nagasak, Takuya1; Muroga, Takeo1; Li, Yanfen2; Yang, Huilong3; Kano, Sho3; Abe, Hiroaki3 |
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2019-09-01 |
| 卷号 | 146页码:1082-1085 |
| 关键词 | Oxide dispersion strengthened steels Microstructure Tensile properties Anisotropy |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2019.02.011 |
| 通讯作者 | Shen, Jingjie(shen.jingjie@nifs.ac.jp) ; Li, Yanfen() |
| 英文摘要 | Microstructure and tensile properties ranged from ambient temperature to 700 degrees C of the 12Cr ODS steel were investigated by scanning electron microscopy, electron backscatter diffraction technique, and tensile tests. Results show that microstructure is composed of elongated grains with < 110 > axis parallel to rolling direction. Ultimate tensile strength and 0.2% offset yield strength gradually decrease with increasing test temperature. Uniform elongation and total elongation reduce with the temperature rising up to 500 degrees C, whereas increase at higher temperatures due to activation of slip systems. Moreover, ductility in rolling direction is better than that in transverse direction. Fracture surfaces suggest that a large number of small and uniform dimples, and predominant cleavage-like facets present in rolling direction, and transverse direction, respectively. |
| 资助项目 | project The development of nuclear fuel cladding with self-healing intelligenceunder the Center of World Intelligence Project for Nuclear ST and Human Resource Development by the Ministry of Education, Culture, Sports, Science and Technology of Japan (M ; National Institute for Fusion Science Collaboration Research program |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000488307400243 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | project The development of nuclear fuel cladding with self-healing intelligenceunder the Center of World Intelligence Project for Nuclear ST and Human Resource Development by the Ministry of Education, Culture, Sports, Science and Technology of Japan (M ; National Institute for Fusion Science Collaboration Research program |
| 源URL | [http://ir.imr.ac.cn/handle/321006/135721]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Shen, Jingjie; Li, Yanfen |
| 作者单位 | 1.Natl Inst Fus Sci, 322-6 Oroshi, Toki, Gifu 5095292, Japan 2.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China 3.Univ Tokyo, Sch Engn, Nucl Profess Sch, 2-22 Shirakata Shirane, Tokai, Ibaraki 3191188, Japan |
| 推荐引用方式 GB/T 7714 | Shen, Jingjie,Nagasak, Takuya,Muroga, Takeo,et al. Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel[J]. FUSION ENGINEERING AND DESIGN,2019,146:1082-1085. |
| APA | Shen, Jingjie.,Nagasak, Takuya.,Muroga, Takeo.,Li, Yanfen.,Yang, Huilong.,...&Abe, Hiroaki.(2019).Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel.FUSION ENGINEERING AND DESIGN,146,1082-1085. |
| MLA | Shen, Jingjie,et al."Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel".FUSION ENGINEERING AND DESIGN 146(2019):1082-1085. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。