Effects of Sc and Zr microalloying on the microstructure and mechanical properties of high Cu content 7xxx Al alloy
文献类型：期刊论文
| 作者 | Liu, Chong-yu1; Teng, Guang-biao1,2; Ma, Zong-yi3; Wei, Li-li1; Zhang, Bing4; Chen, Yong1 |
| 刊名 | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
 |
| 出版日期 | 2019-12-01 |
| 卷号 | 26期号:12页码:1559-1569 |
| ISSN号 | 1674-4799 |
| 关键词 | aluminum alloys microstructural evolution mechanical property grain refinement |
| DOI | 10.1007/s12613-019-1840-7 |
| 通讯作者 | Liu, Chong-yu(lcy261@glut.edu.cn) ; Ma, Zong-yi(zyma@imr.ac.cn) |
| 英文摘要 | The effects of Sc and Zr microalloying on the microstructure and mechanical properties of a 7xxx Al alloy with high Cu content (7055) during casting, deformation, and heat treatment were investigated. The addition of Sc and Zr not only refined the grains but also transformed the theta-phase into the W-phase in the 7055 alloy. Minor Sc and Zr additions enhanced the hardness and yield strength of the 7055-T6 alloy by strengthening the grain boundaries and Al-3(Sc,Zr) precipitates. However, a further increase in the Sc and Zr fractions did not refine the grains but instead resulted in the formation of the large-sized W-phase and primary coarse Al-3(Sc,Zr) phase and subsequently deteriorated the mechanical properties of the alloys. The 7055 alloy with 0.25Sc addition exhibited the best mechanical property among the prepared alloys. |
| 资助项目 | National Natural Science Foundation of China[51601045] ; Guangxi Natural Science Foundation[2016GXNSFDA380028] ; Guangxi Science and Technology Major Project[GKAA17202007] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering ; Mining & Mineral Processing |
| 语种 | 英语 |
| 出版者 | SPRINGER |
| WOS记录号 | WOS:000501072600009 |
| 资助机构 | National Natural Science Foundation of China ; Guangxi Natural Science Foundation ; Guangxi Science and Technology Major Project |
| 源URL | [http://ir.imr.ac.cn/handle/321006/136020]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu, Chong-yu; Ma, Zong-yi |
| 作者单位 | 1.Guilin Univ Technol, Coll Mat Sci & Engn, Guilin 541004, Peoples R China 2.Guangdong JMA Aluminum Profile Factory Grp Co Ltd, Foshan 528200, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 4.Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Hebei, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, Chong-yu,Teng, Guang-biao,Ma, Zong-yi,et al. Effects of Sc and Zr microalloying on the microstructure and mechanical properties of high Cu content 7xxx Al alloy[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2019,26(12):1559-1569. |
| APA | Liu, Chong-yu,Teng, Guang-biao,Ma, Zong-yi,Wei, Li-li,Zhang, Bing,&Chen, Yong.(2019).Effects of Sc and Zr microalloying on the microstructure and mechanical properties of high Cu content 7xxx Al alloy.INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,26(12),1559-1569. |
| MLA | Liu, Chong-yu,et al."Effects of Sc and Zr microalloying on the microstructure and mechanical properties of high Cu content 7xxx Al alloy".INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS 26.12(2019):1559-1569. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。