Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms
文献类型：期刊论文
| 作者 | Zhao Tian-Zhang1; Jin Long1; Xu Yong2; Zhang Shi-Hong2 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2020-01-13 |
| 卷号 | 771页码:7 |
| 关键词 | Al-Li alloy Anisotropy Crystallographic texture Precipitate strengthening |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2019.138572 |
| 通讯作者 | Zhao Tian-Zhang(tzzhao@alum.imr.ac.cn) |
| 英文摘要 | The anisotropic mechanical behaviors of 2198 Al-Li alloy sheet under different heat treatments, including new quenching, natural ageing and artificial ageing, were systematically assessed via uniaxial tensile tests in three different directions: rolling direction (RD), 45 degrees and transverse direction (TD). It's found that the anisotropy of yielding stress after quenching and natural ageing is similar, mainly owing to the same crystallographic texture. The delta' participate generated during natural ageing has no influence on the anisotropy but increases the strength homogeneously. By contrast, 2198 Al-Li alloy after artificial ageing exhibits a different anisotropy of the yielding stress due to the inhomogeneous distribution of T-1 participate on four different variants of {111} plane. It is mainly caused by the inhomogeneous activation of dislocation glide during the pre-deformation, which has been verified by the calculation result via the visco-plastic self-consistent model. A new factor, T, has been proposed to consider the contribution of T-1 on the anisotropic yielding stress. In addition, a new analytical model has been established to predict the anisotropic yielding stress of 2198 AL-Li alloy sheet under different heat treatments and with different pre-deformation, which agrees well with the experimental results. |
| 资助项目 | National Natural Science Foundation of China[:51605310] ; National Natural Science Foundation of China[51875548] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000503324700005 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/136388]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhao Tian-Zhang |
| 作者单位 | 1.Shenyang Aerosp Univ, Shenyang 110136, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhao Tian-Zhang,Jin Long,Xu Yong,et al. Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,771:7. |
| APA | Zhao Tian-Zhang,Jin Long,Xu Yong,&Zhang Shi-Hong.(2020).Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,771,7. |
| MLA | Zhao Tian-Zhang,et al."Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 771(2020):7. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。