Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state
文献类型：期刊论文
| 作者 | Liu, Weifeng1,2,3; Cao, Yanfei3; Guo, Yifeng3; Sun, Mingyue2,3; Xu, Bin2,3; Li, Dianzhong3 |
| 刊名 | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| 出版日期 | 2020-02-01 |
| 卷号 | 38页码:170-182 |
| 关键词 | Solidification Semi-solid forging Microstructure Eutectic carbides |
| ISSN号 | 1005-0302 |
| DOI | 10.1016/j.jmst.2019.07.049 |
| 通讯作者 | Sun, Mingyue(mysun@imr.ac.cn) |
| 英文摘要 | Semi-solid forging of iron-based alloys during solidification has unique characteristics distinct from those of the classical hot forging. With the aim of acquiring precise knowledge concerning the microstructural evolution of bearing steel Cr4Mo4V in this process, a series of semi-solid forging experiments were carried out in which samples were wrapped in a designed pure iron sheath. The effects of forging temperature and forging reduction on the grain morphology and liquid flow behavior were investigated, respectively. By forging solidifying metal (FSM), bulky primary dendrites were broken and spheroidal grains with an average shape factor of 0.87 were obtained at 1360 degrees C. With the decreasing forging temperature to 1340 degrees C, the microstructural homogeneity can be improved. On the other hand, it shows that a higher forging reduction (50%) is essential for the spheroidization of grains and elimination of liquid segregation. Those microstructural characteristics are related to different motion mechanisms of solid and liquid phases at different forging temperatures. Additionally, the effect of semi-solid forging on the eutectic carbides was also investigated, and the results demonstrate that the higher diffusion capacity and less liquid segregation jointly lower the large eutectic carbides and consequently cause its uniform distribution during FSM. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| 资助项目 | National KeyResearch and Development Program[2018YFA0702900] ; National Natural Science Foundation of China[U1508215] ; National Natural Science Foundation of China[51774265] ; National Natural Science Foundation of China[51701225] ; National Science and TechnologyMajor Project of China[2019ZX06004010] ; Key Programof the Chinese Academy of Sciences[ZDRW-CN-2017-1] ; Program of CAS Interdisciplinary Innovation Team |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000503164100019 |
| 出版者 | JOURNAL MATER SCI TECHNOL |
| 资助机构 | National KeyResearch and Development Program ; National Natural Science Foundation of China ; National Science and TechnologyMajor Project of China ; Key Programof the Chinese Academy of Sciences ; Program of CAS Interdisciplinary Innovation Team |
| 源URL | [http://ir.imr.ac.cn/handle/321006/136560]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Sun, Mingyue |
| 作者单位 | 1.Univ Sci & Technol China, Coll Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, Weifeng,Cao, Yanfei,Guo, Yifeng,et al. Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2020,38:170-182. |
| APA | Liu, Weifeng,Cao, Yanfei,Guo, Yifeng,Sun, Mingyue,Xu, Bin,&Li, Dianzhong.(2020).Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,38,170-182. |
| MLA | Liu, Weifeng,et al."Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 38(2020):170-182. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。