中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 金属研究所
  3. 中国科学院金属研究所
Hot Deformation Behavior of a New Al-Mn-Sc Alloy

文献类型：期刊论文

作者Kang, Weiqi1; Yang, Yi1; Cao, Sheng2; Li, Lei3; Xin, Shewei3; Wang, Hao4; Cao, Zhiqiang1; Liang, Enquan5; Zhang, Xi5; Huang, Aijun6
刊名MATERIALS
出版日期2020
卷号13期号:1页码:14
关键词Al-Mn-Sc alloy hot deformation flow stress processing map dynamic recrystallization
DOI10.3390/ma13010022
通讯作者Yang, Yi(yiyang.imr@163.com) ; Cao, Sheng(caozhiqiang@usst.edu.cn)
英文摘要The hot deformation behavior of a new Al-Mn-Sc alloy was investigated by hot compression conducted at temperatures from 330 to 490 degrees C and strain rates from 0.01 to 10 s(-1). The hot deformation behavior and microstructure of the alloy were significantly affected by the deformation temperatures and strain rates. The peak flow stress decreased with increasing deformation temperatures and decreasing strain rates. According to the hot deformation behavior, the constitutive equation was established to describe the steady flow stress, and a hot processing map at 0.4 strain was obtained based on the dynamic material model and the Prasad instability standard, which can be used to evaluate the hot workability of the alloy. The developed hot processing diagram showed that the instability was more likely to occur in the higher Zener-Hollomon parameter region, and the optimal processing range was determined as 420-475 degrees C and 0.01-0.022 s(-1), in which a stable flow and a higher power dissipation were achieved.
资助项目University of Shanghai for Science and Technology[10-00-310-001]
WOS研究方向Materials Science
语种英语
WOS记录号WOS:000515499300022
出版者MDPI
资助机构University of Shanghai for Science and Technology
源URL[http://ir.imr.ac.cn/handle/321006/137563]  
专题金属研究所_中国科学院金属研究所
通讯作者Yang, Yi; Cao, Sheng
作者单位1.Univ Shanghai Sci & Technol, Sch Mat Sci & Engn, Shanghai 200093, Peoples R China
2.Univ Shanghai Sci & Technol, Sch Mat Sci & Engn, Manchester M13 9PL, Lancs, England
3.Northwest Inst Nonferrous Met Res, Xian 710016, Peoples R China
4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
5.Shanghai Aircraft Design & Res Inst, Shanghai 201210, Peoples R China
6.Monash Univ, Dept Mat Sci & Engn, Clayton, Vic 3800, Australia
推荐引用方式
GB/T 7714		 Kang, Weiqi,Yang, Yi,Cao, Sheng,et al. Hot Deformation Behavior of a New Al-Mn-Sc Alloy[J]. MATERIALS,2020,13(1):14.
APA Kang, Weiqi.,Yang, Yi.,Cao, Sheng.,Li, Lei.,Xin, Shewei.,...&Huang, Aijun.(2020).Hot Deformation Behavior of a New Al-Mn-Sc Alloy.MATERIALS,13(1),14.
MLA Kang, Weiqi,et al."Hot Deformation Behavior of a New Al-Mn-Sc Alloy".MATERIALS 13.1(2020):14.

入库方式： OAI收割

来源：金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。