Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling
文献类型：期刊论文
| 作者 | Zhao, Zhipo2,3; Tariq, Naeem ul Haq1; Tang, Junrong2,3; Ren, Yupeng2,3; Liu, Hanhui2,3; Tong, Min2; Yin, Lisong4; Du, Hao2; Wang, Jiqiang2; Xiong, Tianying2 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2020-02-21 |
| 卷号 | 775页码:8 |
| 关键词 | Ti/steel clad plate Cold spray additive manufacturing (CSAM) Mechanical properities Annealing Microstruture |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2020.138968 |
| 通讯作者 | Wang, Jiqiang(jqwang11s@imr.ac.cn) ; Xiong, Tianying(tyxiong@imr.ac.cn) |
| 英文摘要 | A novel method was designed to fabricated Ti/steel clad plates via cold spray additive manufacturing (CSAM) and hot-rolling. In order to study the influence of annealing on the microstructure and mechanical properties of the Ti/steel clad plates, the as-rolled clad plates were subjected to different annealing temperatures in the order: 450, 550 and 650 degrees C. It was revealed that CSAM and hot-rolling promote metallurgical bonding between Ti/Ti as well as Ti/steel interfaces, thus resulting in Ti/steel clad plates with excellent mechanical properties. The annealing treatment promotes inter-diffusion of Ti and Fe across the Ti/steel interface and improves the microstructures of the as-rolled Ti/steel clad plates. The results show that when the annealing temperature is low (L e. 450 degrees C), the elongation of the specimen increases while the ultimate tensile strength and shear strength both decrease through recovery and recrystallization mechanisms. However, when the annealing temperature is too high (Le 650 degrees C), the elongation and strength of the specimen decrease sharply due to the nucleation and growth of brittle TiC and FeTi compounds. The annealing, at 550 degrees C for 3 h, was pin-pointed as the optimum post-rolling treatment to achieve superior ultimate tensile strength (564 MPa), shear strength (280 MPa) and elongation (18%) in the clad plate. |
| 资助项目 | National Natural Science Foundation of China[51671205] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000518725600003 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/137841]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, Jiqiang; Xiong, Tianying |
| 作者单位 | 1.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Islamabad, Pakistan 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 4.Wuyi Univ, Jiangmen 520950, Pakistan |
| 推荐引用方式 GB/T 7714 | Zhao, Zhipo,Tariq, Naeem ul Haq,Tang, Junrong,et al. Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,775:8. |
| APA | Zhao, Zhipo.,Tariq, Naeem ul Haq.,Tang, Junrong.,Ren, Yupeng.,Liu, Hanhui.,...&Xiong, Tianying.(2020).Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,775,8. |
| MLA | Zhao, Zhipo,et al."Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 775(2020):8. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。