Tensile Properties of Selective Laser Melted 316L Stainless Steel
文献类型：期刊论文
| 作者 | Yu Chenfan1; Zhao Congcong1; Zhang Zhefeng2; Liu Wei1 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2020-05-11 |
| 卷号 | 56期号:5页码:683-692 |
| 关键词 | selective laser melting 316L stainless steel tensile property deformation twinning |
| ISSN号 | 0412-1961 |
| DOI | 10.11900/0412.1961.2019.00278 |
| 通讯作者 | Liu Wei(liuw_tsinghua@163.com) |
| 英文摘要 | Selective laser melting (SLM), as the most common additive manufacturing (AM) method, is capable of manufacturing metallic components with complex shape layer by layer. Compared with conventional manufacturing technologies such as casting or forging, the SLM technology has the advantages of high degree accuracy, high material utilization rate and environmentally friendly, and has attracted great attention in the fields of aerospace, nuclear power and medicine. The 316L austenitic stainless steel is widely used in the industrial field because of the excellent corrosion resistance and plasticity. It is also one of the commonly used material systems for SLM. In this work, the tensile properties and fracture mechanism of 316L stainless steel fabricated via SLM technology were investigated. The microstructure of the SLMed 316L specimens after tensile fracture was characterized and analyzed. The results show that the SLMed 316L stainless steel has a relatively desirable combination of strength and ductility, and its tensile performance is obviously better than that of 316L stainless steel prepared by traditional methods. The nanometer-scale cell structure inside the grain contributes to the improvement of strength. Deformation twins were observed in the SLMed 316L stainless steel after tensile test. The appearance of twins is oriented-dependent, and it is easy to occur in the grain with the direction near <110>-<111>. |
| 资助项目 | National Magnetic Confinement Fusion Science Program of China[2014GB117000] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000529326900002 |
| 出版者 | SCIENCE PRESS |
| 资助机构 | National Magnetic Confinement Fusion Science Program of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/138601]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu Wei |
| 作者单位 | 1.Tsinghua Univ, Sch Mat Sci & Engn, Beijing 100084, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yu Chenfan,Zhao Congcong,Zhang Zhefeng,et al. Tensile Properties of Selective Laser Melted 316L Stainless Steel[J]. ACTA METALLURGICA SINICA,2020,56(5):683-692. |
| APA | Yu Chenfan,Zhao Congcong,Zhang Zhefeng,&Liu Wei.(2020).Tensile Properties of Selective Laser Melted 316L Stainless Steel.ACTA METALLURGICA SINICA,56(5),683-692. |
| MLA | Yu Chenfan,et al."Tensile Properties of Selective Laser Melted 316L Stainless Steel".ACTA METALLURGICA SINICA 56.5(2020):683-692. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。