Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel
文献类型：期刊论文
| 作者 | Ebrahimnia, Mohamad1; Xie, Yujiang1; Chi, Changtai2 |
| 刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| 出版日期 | 2020-04-01 |
| 卷号 | 33期号:4页码:528-538 |
| 关键词 | Direct laser metal deposition Bainite Equiaxed ferrite Void Steel Microstructure Mechanical properties Rapid solidification |
| ISSN号 | 1006-7191 |
| DOI | 10.1007/s40195-019-00974-4 |
| 通讯作者 | Xie, Yujiang(Yjxie@imr.ac.cn) |
| 英文摘要 | Direct laser metal deposition was used for preparing blocks of steel 12CrNi2 using four different laser powers under two different deposition environments including atmospheric environment and Ar-protected chamber. The results showed that microstructures and mechanical properties were significantly affected by different laser powers. Increasing laser power and deposition in Ar chamber will lead to a decrease in the quantity and size of the voids, which brings more elongation to the samples. Bainitic microstructure was replaced by Widmanstatten ferrite and pearlite, and the amount of proeutectoid ferrite increased with increasing laser power. Moreover, microstructures of previous layers were completely altered in high laser power. Excessive heat accumulation by using high heat input can produce equiaxed ferritic grains with the pearlites in previously deposited layers. Hardness of deposited samples increased from the bottom layer toward the top layer. By using a diode laser with a spot diameter size of 2 mm, the 900-W laser power is suitable for producing crack- and void-free samples. However, post-deposition heat treatment is necessary for obtaining homogeneous desired microstructure and grain size in the manufactured samples. |
| 资助项目 | National Key Research and Development Program of China[2016YFB1100203] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000529992200001 |
| 出版者 | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
| 资助机构 | National Key Research and Development Program of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/138704]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Xie, Yujiang |
| 作者单位 | 1.Zhejiang Handsome Intelligent Remfg Technol Co Lt, Jiaxing 314000, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Ebrahimnia, Mohamad,Xie, Yujiang,Chi, Changtai. Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2020,33(4):528-538. |
| APA | Ebrahimnia, Mohamad,Xie, Yujiang,&Chi, Changtai.(2020).Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel.ACTA METALLURGICA SINICA-ENGLISH LETTERS,33(4),528-538. |
| MLA | Ebrahimnia, Mohamad,et al."Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel".ACTA METALLURGICA SINICA-ENGLISH LETTERS 33.4(2020):528-538. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。