中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Investigation on microstructure and mechanical properties of a vacuum brazed joint of gamma '-strengthened Co-based single crystal superalloy before and after the post-bond heat treatment

文献类型:期刊论文

作者Wang, S. Y.1,2; Sun, Y.2; Hou, X. Y.2; Cui, C. Y.2; Sun, X. F.2; Zhou, Y. Z.2
刊名VACUUM
出版日期2020-07-01
卷号177页码:11
关键词Transient liquid phase bonding gamma '-strengthened Co-Based single crystal super alloy Microstructure Microhardness
ISSN号0042-207X
DOI10.1016/j.vacuum.2020.109413
通讯作者Sun, Y.(yuansun@imr.ac.cn)
英文摘要Transient liquid phase bonding of gamma'-strengthened Co-based superalloy was carried out using Ni-based filler alloy. The effects of post-bond heat treatment (PBHT) on the microstructure and mechanical properties of the gamma'-strengthened Co-based superalloy joint were systematically investigated. Two distinct regions were observed in the isothermally solidified zone: primary gamma' phase zone (PZ) and secondary gamma' phase zone (SZ). The diffusion of Al from the substrate to the liquid interlayer proves to be the main reason for the precipitation of gamma' phases, showing a significant growth trend after the PBHT. The joint after the PBHT shows higher microhardness in most areas of the bonding zone. However, some parts of the diffusion affected zone show the contrary result. This could attribute to the competition consequence of the solid solution strengthening and second phase strengthening. Furthermore, the post-bond heat treated joint exhibited higher yield strength and longer stress rupture life. Our experimental results help to better understand the microstructural characteristic of the new type Co-based superalloy and provide a direction for further optimizing the brazing joint.
资助项目National Natural Science Foundation of China[51771191] ; National Key Research and Development Program of China[2017YFA0700704] ; Aerospace Power Foundation[DLJJ1825]
WOS研究方向Materials Science ; Physics
语种英语
WOS记录号WOS:000538148400058
出版者PERGAMON-ELSEVIER SCIENCE LTD
资助机构National Natural Science Foundation of China ; National Key Research and Development Program of China ; Aerospace Power Foundation
源URL[http://ir.imr.ac.cn/handle/321006/139064]  
专题金属研究所_中国科学院金属研究所
通讯作者Sun, Y.
作者单位1.Univ Sci & Technol China, Sch Mat Sci & Engn, 96 JinZhai Rd, Hefei 230026, Peoples R China
2.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Wang, S. Y.,Sun, Y.,Hou, X. Y.,et al. Investigation on microstructure and mechanical properties of a vacuum brazed joint of gamma '-strengthened Co-based single crystal superalloy before and after the post-bond heat treatment[J]. VACUUM,2020,177:11.
APA Wang, S. Y.,Sun, Y.,Hou, X. Y.,Cui, C. Y.,Sun, X. F.,&Zhou, Y. Z..(2020).Investigation on microstructure and mechanical properties of a vacuum brazed joint of gamma '-strengthened Co-based single crystal superalloy before and after the post-bond heat treatment.VACUUM,177,11.
MLA Wang, S. Y.,et al."Investigation on microstructure and mechanical properties of a vacuum brazed joint of gamma '-strengthened Co-based single crystal superalloy before and after the post-bond heat treatment".VACUUM 177(2020):11.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。