Investigation on the microstructure and mechanical behaviors of a laser formed Nb-Ti-Al alloy
文献类型：期刊论文
| 作者 | Shi, Zhiwu1; Liu, Jinlai2; Wei, Hua3; Zhang, Hongyu2; Sun, Xiaofeng2; Zheng, Qi2 |
| 刊名 | MATERIALS CHARACTERIZATION
 |
| 出版日期 | 2020-04-01 |
| 卷号 | 162页码:8 |
| 关键词 | Laser forming Nb-Ti-Al alloy Microstructure Ti(O,C) Double diffraction Mechanical behavior |
| ISSN号 | 1044-5803 |
| DOI | 10.1016/j.matchar.2020.110193 |
| 通讯作者 | Shi, Zhiwu(shizhiwu@acae.com.cn) ; Zheng, Qi(qzheng@imr.ac.cn) |
| 英文摘要 | Nb-Ti-Al alloys have attracted much attention as a potential candidate for high-temperature structural applications beyond the scope of Ni-based superalloys. Previously, Nb-Ti-Al alloys were prepared by arc-melting or hot-pressing. In this study, laser forming of the Nb-23Ti-15Al alloy is explored, and the microstructure and mechanical behaviors are systematically investigated. The results indicate that the nearly defectless Nb-Ti-Al alloy with fine dendrites could be obtained through laser forming. Three phases, beta, delta and Ti(O,C), present in the alloy, and the beta/delta matrix displays a columnar microstructure. Moreover, the Ti(O,C) phase, a solid-solution of TiO or TiC, appears in the alloy. Ti(O,C) is formed due to the introduction of the O and C from the elemental powder, which has a face-centered cubic (FCC) structure and a moderate lattice parameter between that of TiO and TiC. Two morphologies of Ti(O,C), large cobblestone-like particles and small dispersive particles, are observed in the alloy. Forbidden reflections of delta phase occur due to double diffraction and slight superlattice reflections of beta phase arise. Furthermore, refined beta/delta phases and dispersed small Ti(O,C) result in higher microhardness and fracture toughness. In brief, our results indicate that laser forming is a potential method for manufacturing Nb-Ti-Al alloys with prominent properties. |
| 资助项目 | NNSF of China[51601192] ; NNSF of China[51671189] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000539353900023 |
| 出版者 | ELSEVIER SCIENCE INC |
| 资助机构 | NNSF of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/139240]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Shi, Zhiwu; Zheng, Qi |
| 作者单位 | 1.AECC Commercial Aircraft Engine Co Ltd, Dept Mat Sci & Mfg Proc, Shanghai 200241, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Superalloys Div, 72 Wenhua Rd, Shenyang 110016, Peoples R China 3.Zhejiang Univ, Coll Civil Engn & Architecture, Hangzhou 310058, Peoples R China |
| 推荐引用方式 GB/T 7714 | Shi, Zhiwu,Liu, Jinlai,Wei, Hua,et al. Investigation on the microstructure and mechanical behaviors of a laser formed Nb-Ti-Al alloy[J]. MATERIALS CHARACTERIZATION,2020,162:8. |
| APA | Shi, Zhiwu,Liu, Jinlai,Wei, Hua,Zhang, Hongyu,Sun, Xiaofeng,&Zheng, Qi.(2020).Investigation on the microstructure and mechanical behaviors of a laser formed Nb-Ti-Al alloy.MATERIALS CHARACTERIZATION,162,8. |
| MLA | Shi, Zhiwu,et al."Investigation on the microstructure and mechanical behaviors of a laser formed Nb-Ti-Al alloy".MATERIALS CHARACTERIZATION 162(2020):8. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。