中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Hot deformation behavior and microstructural evolution of powder metallurgy Ti-22Al-24Nb-0.5Mo alloy

文献类型:期刊论文

作者Shao, Z. J.1; Li, Y.1,2; Zhou, B.1; He, X. C.1; Zhang, S. Z.1,2; Xu, L.3
刊名MATERIALS CHARACTERIZATION
出版日期2020-07-01
卷号165页码:10
关键词Ti-22Al-24Nb-0.5Mo alloy Hot deformation Multiple yielding Microstructure evolution Apparent activation energies Processing map
ISSN号1044-5803
DOI10.1016/j.matchar.2020.110376
通讯作者Zhang, S. Z.(szzhangyt@163.com)
英文摘要The hot deformation behavior and microstructural evolution of Ti-22Al-24Nb-0.5Mo alloy were investigated by compression test in the temperature range of 930 degrees C to 1050 degrees C and strain rate range of 0.001-1 s(-1). In response to temperature and strain rate, the flow stresses of true stress-strain curves increased with the decrease of temperature and increase of strain rate and multiple yielding phenomena are observed at strain rates> 0.1 s(-1). The apparent activation energies in the low temperature (alpha(2) + B2 + O) and high temperature (alpha(2) + B2) phase regions are estimated to be 700 kJ/mol and 417 kJ/mol, respectively. There are three suitable domains for hot working in processing map, in which the alloy has fine grains and continuous dynamic recrystallization accompanying by the globularization of O phase. In two instability domains, discontinuous dynamic recrystallization and strong interactions of secondary phases and dislocations occurred. This short-term imbalance between dynamic softening and work hardening is responsible for the multiple yielding behavior.
资助项目Natural Science Foundation of Shandong Province, China[ZR2019MEM012] ; Shandong Major Scientific and Technological Innovation Program, China[2019JZZY010325]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:000541742100015
出版者ELSEVIER SCIENCE INC
资助机构Natural Science Foundation of Shandong Province, China ; Shandong Major Scientific and Technological Innovation Program, China
源URL[http://ir.imr.ac.cn/handle/321006/139401]  
专题金属研究所_中国科学院金属研究所
通讯作者Zhang, S. Z.
作者单位1.Yantai Univ, Sch Nucl Equipment & Nucl Engn, Yantai 264005, Peoples R China
2.Yantai Univ, Inst Adv Studies Precis Mat, Yantai 264005, Peoples R China
3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Shao, Z. J.,Li, Y.,Zhou, B.,et al. Hot deformation behavior and microstructural evolution of powder metallurgy Ti-22Al-24Nb-0.5Mo alloy[J]. MATERIALS CHARACTERIZATION,2020,165:10.
APA Shao, Z. J.,Li, Y.,Zhou, B.,He, X. C.,Zhang, S. Z.,&Xu, L..(2020).Hot deformation behavior and microstructural evolution of powder metallurgy Ti-22Al-24Nb-0.5Mo alloy.MATERIALS CHARACTERIZATION,165,10.
MLA Shao, Z. J.,et al."Hot deformation behavior and microstructural evolution of powder metallurgy Ti-22Al-24Nb-0.5Mo alloy".MATERIALS CHARACTERIZATION 165(2020):10.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。