Digital light processing 3D printing of ceramic shell for precision casting
文献类型：期刊论文
| 作者 | Li, Fei3; Ji, Xu3; Wu, Zhenxing1; Qi, Chengkang3; Lai, Junhua3; Xian, Quangang4; Sun, Baode2,3 |
| 刊名 | MATERIALS LETTERS
 |
| 出版日期 | 2020-10-01 |
| 卷号 | 276页码:4 |
| ISSN号 | 0167-577X |
| 关键词 | 3D printing Digital light processing Ceramics Shell Cast |
| DOI | 10.1016/j.matlet.2020.128037 |
| 通讯作者 | Li, Fei(lifei74@sjtu.edu.cn) ; Xian, Quangang(qgxian@imr.ac.cn) |
| 英文摘要 | Ceramic shell with complex structure for precision casting was successfully fabricated by the digital light processing (DLP) 3D printing method. A calcined kaolin (Al(2)O(3 center dot)2SiO(2)) suspension with a solid loading of 45 vol% for 3D printing was prepared by using UV-curable resin as a binder. The experimental results show that the suspension displayed a shear-thinning fluid characteristic, which was suitable for 3D printing. After being printed and subsequently sintered at 1200 degrees C, the porosity, relative density and transverse rupture strength of the shell were 24.5%, 2.08 g cm(3) and 9.98 MPa, respectively. A stainless steel impeller with four curved blades was successfully casted by using the 3D printed ceramic shell. (C) 2020 Elsevier B.V. All rights reserved. |
| 资助项目 | National Science and Technology Major Project Aero engine and Gas Turbine(China)[2017-VII-0008-0102] |
| WOS研究方向 | Materials Science ; Physics |
| 语种 | 英语 |
| 出版者 | ELSEVIER |
| WOS记录号 | WOS:000554915000002 |
| 资助机构 | National Science and Technology Major Project Aero engine and Gas Turbine(China) |
| 源URL | [http://ir.imr.ac.cn/handle/321006/140100]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Fei; Xian, Quangang |
| 作者单位 | 1.Lianyungang Yuanyu Met Prod Co Ltd, Lianyungang 222000, Peoples R China 2.Shanghai Jiao Tong Univ, State Key Lab Met Matrix Composites, Shanghai 200240, Peoples R China 3.Shanghai Jiao Tong Univ, Shanghai Key Lab High Temp Mat & Precis Forming, Shanghai 200240, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Fei,Ji, Xu,Wu, Zhenxing,et al. Digital light processing 3D printing of ceramic shell for precision casting[J]. MATERIALS LETTERS,2020,276:4. |
| APA | Li, Fei.,Ji, Xu.,Wu, Zhenxing.,Qi, Chengkang.,Lai, Junhua.,...&Sun, Baode.(2020).Digital light processing 3D printing of ceramic shell for precision casting.MATERIALS LETTERS,276,4. |
| MLA | Li, Fei,et al."Digital light processing 3D printing of ceramic shell for precision casting".MATERIALS LETTERS 276(2020):4. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。