Improving mechanical properties of selective laser melted Co29Cr9W3Cu alloy by eliminating mesh-like random high-angle grain boundary
文献类型：期刊论文
| 作者 | Lu, Yanjin2,3; Zhao, Wei1; Yang, Chunguagn4; Liu, Yujing5; Xiang, Hongliang1; Yang, Ke4; Lin, Jinxin2,3 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2020-08-19 |
| 卷号 | 793页码:12 |
| 关键词 | Additive manufacturing Selective laser melting Residual stress Heat treatment Biomaterials |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2020.139895 |
| 通讯作者 | Liu, Yujing(yujing.liu@uwa.edu.au) ; Yang, Ke(kyang@imr.ac.cn) ; Lin, Jinxin(franklin@fjirsm.ac.cn) |
| 英文摘要 | Selective laser melting (SLM) has been attracting increasing attention as a suitable route for fabricating personalized orthopedic implants to address patient-prosthesis mismatches and has been used for producing Co29Cr9W3Cu alloys in our previous study. However, SLM technology can result in the formation of mesh-like random high-angle grain boundaries (indicated as molten pool boundaries) and accumulation of residual stress in the microstructure, possibly causing an unstable mechanical property. In this study, the research on the relationship between microstructural evolution and mechanical properties was performed on the SLM-produced Co29Cr9W3Cu alloys with different heat treatments to improve the reliable mechanical property of the SLM-produced Co29Cr9W3Cu orthopedic implants. It was found that the microstrucutre with mesh-like random high-angle grain boundaries could be eliminated during recrystallization, replaced by the one with equiaxial structure containing the Sigma 3 grain boundaries (annealing twin). Most importantly, the combined effect of eliminating the mesh-like random high-angle grain boundaries and residual stress and generating the Sigma 3 grain boundary contributed to an increase in elongation from 12.49% of the as-SLM-produced one to 23.38%. Proper heat treatment is considered to be an efficient strategy to improve the mechanical properties of the SLM-produced Co29Cr9W3Cu alloy with a desired tensile ductility. |
| 资助项目 | National Natural Science Foundation of China[51801198] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000578957200052 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/140909]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu, Yujing; Yang, Ke; Lin, Jinxin |
| 作者单位 | 1.Fuzhou Univ, Sch Mech Engn & Automat, Fuzhou 350108, Peoples R China 2.Chinese Acad Sci, Fujian Inst Res Struct Matter, Key Lab Optoelect Mat Chem & Phys, 155 Yangqiao Rd West, Fuzhou 350002, Peoples R China 3.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 4.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China 5.Univ Western Australia, Sch Mech & Chem Engn, 35 Stirling Highway, Perth, WA 6009, Australia |
| 推荐引用方式 GB/T 7714 | Lu, Yanjin,Zhao, Wei,Yang, Chunguagn,et al. Improving mechanical properties of selective laser melted Co29Cr9W3Cu alloy by eliminating mesh-like random high-angle grain boundary[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,793:12. |
| APA | Lu, Yanjin.,Zhao, Wei.,Yang, Chunguagn.,Liu, Yujing.,Xiang, Hongliang.,...&Lin, Jinxin.(2020).Improving mechanical properties of selective laser melted Co29Cr9W3Cu alloy by eliminating mesh-like random high-angle grain boundary.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,793,12. |
| MLA | Lu, Yanjin,et al."Improving mechanical properties of selective laser melted Co29Cr9W3Cu alloy by eliminating mesh-like random high-angle grain boundary".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 793(2020):12. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。