Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel
文献类型：期刊论文
| 作者 | Zhang, W.1,4; Dong, Z.4; Kang, H.1,4; Yang, C.1,4; Peng, X.2,3 |
| 刊名 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
 |
| 出版日期 | 2021-02-01 |
| 卷号 | 288页码:11 |
| 关键词 | Laser melting deposition Dual-phase steel Mechanical property Work-hardening rate |
| ISSN号 | 0924-0136 |
| DOI | 10.1016/j.jmatprotec.2020.116907 |
| 通讯作者 | Peng, X.(xpeng@nchu.edu.cn) |
| 英文摘要 | A ferrite-austenite 12CrNi2 alloy steel additively manufactured by laser melting deposition (LMD) has been treated by various quenching methods, including direct quenching (DQ), inter-critical quenching (IQ) and step quenching (SQ), respectively, to form the martensite-ferrite dual-phase steel with a similar major volume fraction (62 vol.%) but different grain sizes and lath substructures of martensite. The results demonstrate that SQ, DQ and IQ help to refine the grains of martensite in order, correspondingly decreasing the yield strength, ultimate tensile strength but increasing in the uniform logarithmic strain of the alloy steel. The effect of not only the interface structures and substructures of martensite but also the quenching-route-dependent structures of ferrite on mechanical properties was interpreted in detail. Curiously, the directly quenched steel displays a higher post-uniform logarithmic strain as compared to the inter-critically quenched steel. The abnormal result occurs due to that DQ cannot completely homogenize the microstructural difference between the laser-scanned layers and the interlayer heat-affected zones of the as-deposited alloy steel. |
| 资助项目 | National Key Research and Development Program of China[2016YFB1100203] |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000582804800058 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key Research and Development Program of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/141267]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Peng, X. |
| 作者单位 | 1.Univ Sci & Technol China, Coll Mat Sci & Engn, Hefei 230000, Anhui, Peoples R China 2.Nanchang Hangkong Univ, Sch Mat Sci & Engn, Nanchang 330063, Jiangxi, Peoples R China 3.Nanchang Hangkong Univ, Jiangxi Prov Engn Res Ctr Surface Technol Aeronau, 696 Fenghenan Ave, Nanchang 330063, Jiangxi, Peoples R China 4.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, W.,Dong, Z.,Kang, H.,et al. Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2021,288:11. |
| APA | Zhang, W.,Dong, Z.,Kang, H.,Yang, C.,&Peng, X..(2021).Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,288,11. |
| MLA | Zhang, W.,et al."Effect of various quenching treatments on microstructure and mechanical behavior of a laser additively manufactured 12CrNi2 alloy steel".JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 288(2021):11. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。