ANISOTROPY OF YIELDING/HARDENING AND MICRO-INHOMOGENEITY OF DEFORMING/ROTATING FOR A POLYCRYSTALLINE METAL UNDER CYCLIC TENSION COMPRESSION
文献类型：期刊论文
| 作者 | Zhang Keshi1; Shi Yanke1; Xu Lingbo1; Yu Duokui2 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2011 |
| 卷号 | 47期号:10页码:1292-1300 |
| 关键词 | SUBSEQUENT YIELD SURFACE CONSTITUTIVE THEORIES PLASTICITY STRAIN MODELS COPPER cyclic plasticity slipping anisotropic yielding and hardening inhomogeneous deformation |
| ISSN号 | 0412-1961 |
| 其他题名 | ANISOTROPY OF YIELDING/HARDENING AND MICRO-INHOMOGENEITY OF DEFORMING/ROTATING FOR A POLYCRYSTALLINE METAL UNDER CYCLIC TENSION- COMPRESSION |
| 英文摘要 | The mesoscopic analyses at a grain level are carried out for a pure copper under symmetrical strain cyclic loading. The Voronoi crystal aggregation which consists of a number of randomly arranged crystal grains is adopted in the analysis as a RVE (representative volume element) of a metal material, and a crystalline plastic model is applied to describe the grain's mesoscopic constitutive relationship, by which the mesoscopic plastic slipping in anisotropic grain follows the nonlinear kinematic hardening law. Through numerical simulation it is confirmed that the present method can be applied to simulate the hysteresis for a polycrystalline material under cycle loading of different strain amplitudes, and it can be used to estimate the subsequent yield surface shape and its curvature change of the material in the cycle loading process, which are relative with the preloading direction. According to statistical analysis, it is found that the coefficient of variation (COV) for internal axial strain in the macro tension direction of the polycrystalline RYE considerably increases with the cyclic number in the symmetrical strain cycle loading, and the statistical lattice rotating of the material increases with loading cycle number. These results indicate that the internal material's microstructure will tend to heterogeneity, since the coefficients of variation for the inhornogeneous strain and rotation angle increase with the cyclic number. |
| 资助项目 | [National Natural Science Foundation of China] ; [Science Foundation of Guangxi University] ; [Guangxi Science and Technology Lab Center] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:4378657 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/142598]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.广西大学 2.中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Zhang Keshi,Shi Yanke,Xu Lingbo,et al. ANISOTROPY OF YIELDING/HARDENING AND MICRO-INHOMOGENEITY OF DEFORMING/ROTATING FOR A POLYCRYSTALLINE METAL UNDER CYCLIC TENSION COMPRESSION[J]. ACTA METALLURGICA SINICA,2011,47(10):1292-1300. |
| APA | Zhang Keshi,Shi Yanke,Xu Lingbo,&Yu Duokui.(2011).ANISOTROPY OF YIELDING/HARDENING AND MICRO-INHOMOGENEITY OF DEFORMING/ROTATING FOR A POLYCRYSTALLINE METAL UNDER CYCLIC TENSION COMPRESSION.ACTA METALLURGICA SINICA,47(10),1292-1300. |
| MLA | Zhang Keshi,et al."ANISOTROPY OF YIELDING/HARDENING AND MICRO-INHOMOGENEITY OF DEFORMING/ROTATING FOR A POLYCRYSTALLINE METAL UNDER CYCLIC TENSION COMPRESSION".ACTA METALLURGICA SINICA 47.10(2011):1292-1300. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。