Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank
文献类型：期刊论文
| 作者 | Zhang Huawei2; Liu Lizhong2; Hu Ping2; Liu Xianghua1 |
| 刊名 | JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
 |
| 出版日期 | 2012 |
| 卷号 | 19期号:9页码:8-12 |
| 关键词 | tailor rolled blank U-channel springback annealing |
| ISSN号 | 1006-706X |
| 其他题名 | Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank |
| 英文摘要 | In order to grasp the springback rule of TRB (tailor rolled blank) parts after forming, the springback behavior of TRB was investigated by integrating such three means as theoretical research, numerical simulation and stamping experiments. Fundamental theories of springback were analyzed. The stamping and springback processes of annealed 1. 2/2. 0 mm TRB, 1. 2 mm and 2. 0 mm plates for U-channel were simulated, and the simulation results were compared with the experiments. The results indicate that the springback of TRB falls in between those of the 1. 2 mm and 2. 0 mm plates. It is desirable for the TRB U-channel to have die clearance of 1. 1 times maximum blank thickness and friction coefficient of about 0. 12, and longer thickness-transition zone is preferable. The simulation data demonstrate reasonably good agreement with the experiments. |
| 资助项目 | [National Natural Science Foundation of China] ; [National Basic Research Program of China] ; [Fundamental Research Funds for Central Universities of China] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:4632632 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/142918]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.中国科学院金属研究所 2.大连大学 |
| 推荐引用方式 GB/T 7714 | Zhang Huawei,Liu Lizhong,Hu Ping,et al. Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2012,19(9):8-12. |
| APA | Zhang Huawei,Liu Lizhong,Hu Ping,&Liu Xianghua.(2012).Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,19(9),8-12. |
| MLA | Zhang Huawei,et al."Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL 19.9(2012):8-12. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。