Conditions for formation of a double-recirculation flow pattern in a slab continuous casting mold with argon gas blowing
文献类型:期刊论文
作者 | Cao Na; Zhu Miaoyong |
刊名 | ACTA METALLURGICA SINICA
![]() |
出版日期 | 2008 |
卷号 | 44期号:5页码:626-630 |
关键词 | WATER-MODEL EXPERIMENTS NUMERICAL-SIMULATION INTERFACIAL BEHAVIOR IMMERSION NOZZLE LIQUID STEEL FLUID-FLOW STRAND SPEED continuous casting mold blowing argon gas double - recirculation flow pattern numerical simulation |
ISSN号 | 0412-1961 |
其他题名 | CONDITIONS FOR FORMATION OF A DOUBLERECIRCULATION FLOW PATTERN IN A SLAB CONTINUOUS CASTING MOLD WITH ARGON GAS BLOWING |
英文摘要 | The formed conditions of a double - recirculation flow pattern (DRFP) in a slab continuous casting mold with blowing argon gas were quantitive described using the Lagrange multi - phase flow model, and the prediction was validated by the water model. The influences of argon gas flowrate, fluid steel mass flowrate, mold width, submergence depth of submerged entry nozzle (SEN) and port downward angle on the DRFP were numerically investigated. The results show that it is important for ensuring the DRFP that the argon gas flowrate matches the other casting conditions. The critical argon gas flowrate increases with increasing fluid steel mass flowrate, and the range of argon gas flowrate for keeping the DRFP will be enlarged by decreasing the mold width and increasing the submergence depth of SEN as the fluid steel mass flowrate is more than 2.5 t/min, nevertheless, the port downward angle of SEN has little effect on it. However, the operation parameters have no significant influence on it as the fluid steel mass flowrate is below 2.5 t/min. |
语种 | 英语 |
CSCD记录号 | CSCD:3295318 |
源URL | [http://ir.imr.ac.cn/handle/321006/145252] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
作者单位 | 中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Cao Na,Zhu Miaoyong. Conditions for formation of a double-recirculation flow pattern in a slab continuous casting mold with argon gas blowing[J]. ACTA METALLURGICA SINICA,2008,44(5):626-630. |
APA | Cao Na,&Zhu Miaoyong.(2008).Conditions for formation of a double-recirculation flow pattern in a slab continuous casting mold with argon gas blowing.ACTA METALLURGICA SINICA,44(5),626-630. |
MLA | Cao Na,et al."Conditions for formation of a double-recirculation flow pattern in a slab continuous casting mold with argon gas blowing".ACTA METALLURGICA SINICA 44.5(2008):626-630. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。