中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys

文献类型:期刊论文

作者Li Runxia; Liu Lanji; Zhang Lijun; Sun Jihong; Shi Yuanji; Yu Baoyi
刊名JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
出版日期2017
卷号33期号:4页码:404-410
ISSN号1005-0302
关键词ADDITIONS Hypereutectic Al-Si alloys Squeeze casting Microstructure Mechanical properties Primary Si phases
其他题名Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys
英文摘要The effect of squeeze casting on microstructure and mechanical properties of hypereutectic Al-xSi alloys ( x = 15, 17.5, 22 wt%) was investigated in this study. Results show that microstructure of the hypereutectic Al-xSi alloys was obviously improved by squeeze casting. The amount of coarse primary Si phase decreased, while that of fine primary alpha-Al dendrites increased with the increase of squeeze casting pressure. Due to the decrease of coarse primary Si particles, cracking of the matrix was reduced, whilst the fine microstructure, and mechanical properties of the squeeze casting alloys were improved. Compared with gravity casting alloys, mechanical properties of the hypereutectic Al-xSi alloys solidified at 600 MPa were improved significantly. Hardness of the squeeze casting hypereutectic Al-(15, 17.5, 22 wt%) Si alloys was improved by 15.91%, 12.23%, 17.48%, ultimate tensile strength was improved by 37.85%, 32.27%, 22.74%, and elongation was improved by 55.83%, 167.86%, 126.76%, respectively. Due to the uniform distribution of Si phases in squeeze casting Al-xSi alloys, their wear resistance was markedly enhanced. Copyright (C) 2017, The editorial office of Journal of Materials Science & Technology. Published by Elsevier Limited.
资助项目[National Natural Science Foundation of China] ; [Shenyang Application Basic Research Fund]
语种英语
CSCD记录号CSCD:5977641
源URL[http://ir.imr.ac.cn/handle/321006/145797]  
专题金属研究所_中国科学院金属研究所
作者单位中国科学院金属研究所
推荐引用方式
GB/T 7714
Li Runxia,Liu Lanji,Zhang Lijun,et al. Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2017,33(4):404-410.
APA Li Runxia,Liu Lanji,Zhang Lijun,Sun Jihong,Shi Yuanji,&Yu Baoyi.(2017).Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,33(4),404-410.
MLA Li Runxia,et al."Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 33.4(2017):404-410.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。