Microstructure and Mechanical Properties of Ti-6AI-4V by Electron Beam Rapid Manufacturing
文献类型：期刊论文
| 作者 | Suo Hongbo1; Chen Zheyuan2; Liu Jianrong3; Gong Shuili2; Xiao Jianzhong1 |
| 刊名 | Rare Metal Materials and Engineering
 |
| 出版日期 | 2014 |
| 卷号 | 43期号:4页码:780-785 |
| 关键词 | 电子束快速制造 显微组织 力学性能 |
| ISSN号 | 1002-185X |
| 其他题名 | Microstructure and Mechanical Properties of Ti-6AI-4V by Electron Beam Rapid Manufacturing |
| 英文摘要 | Electron beam rapid manufacturing (EBRM) is a novel layer-additive manufacturing process which was developed to directly fabricate metal parts from computer aided design (CAD) data. The present study was conducted to evaluate the microstructure and the mechanical properties of Ti-6Al-4V by EBRM. Results show that typical microstructures exhibit large columnar β grains nucleated at the substrate and grew epitaxially along the height direction of deposits through many deposition layers, and alternately light and dark banded textures at layer-layer and bead-bead interfaces have been also found due to complex thermal history during deposition process. As a result, the tensile properties of the as-deposited and the as-annealed deposits exhibit distinct anisotropy. The strength in X and Y directions are similar and markedly higher than that in Z. No significant impact of annealing treatment has been found on room temperature tensile properties. Hot isostatic pressing (HIP) treatment obviously decreases the dispersion of the high cycle fatigue data and improves both ductility and toughness, while at the expense of the tensile strength. The tensile properties of the as-deposited and as-annealed Ti-6Al-4V by EBRM can meet the mechanical property requirements of AMS4999 standard, but can not fully meet the requirements of HB5432 standard. |
| 语种 | 英语 |
| CSCD记录号 | CSCD:5131985 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/146409]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.华中科技大学 2.Beijing Aeronautical Manufacturing Technology Research Institute 3.中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Suo Hongbo,Chen Zheyuan,Liu Jianrong,et al. Microstructure and Mechanical Properties of Ti-6AI-4V by Electron Beam Rapid Manufacturing[J]. Rare Metal Materials and Engineering,2014,43(4):780-785. |
| APA | Suo Hongbo,Chen Zheyuan,Liu Jianrong,Gong Shuili,&Xiao Jianzhong.(2014).Microstructure and Mechanical Properties of Ti-6AI-4V by Electron Beam Rapid Manufacturing.Rare Metal Materials and Engineering,43(4),780-785. |
| MLA | Suo Hongbo,et al."Microstructure and Mechanical Properties of Ti-6AI-4V by Electron Beam Rapid Manufacturing".Rare Metal Materials and Engineering 43.4(2014):780-785. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。