Annealing Treatment and Basketweave Structure Deformation Mechanism of Laser Deposition Manufactured TA15 Titanium Alloy
文献类型：期刊论文
| 作者 | Yang Guang; Wang Wendong; Qin Lanyun; Ren Yuhang; Li Changfu; Wang Wei |
| 刊名 | RARE METAL MATERIALS AND ENGINEERING
 |
| 出版日期 | 2017 |
| 卷号 | 46期号:7页码:1935-1942 |
| 关键词 | HEAT-TREATMENT MICROSTRUCTURE TEMPERATURES laser deposition manufacturing alpha plus beta phase zone annealing treatment microstructure mechanical properties |
| ISSN号 | 1002-185X |
| 其他题名 | Annealing Treatment and Basketweave Structure Deformation Mechanism of Laser Deposition Manufactured TA15 Titanium Alloy |
| 英文摘要 | TA15 titanium alloy bulk specimens were prepared by laser deposition manufacturing with spherical TA15 powder as starting material. The effects of alpha+beta phase zone annealing treatment on microstructure and mechanical properties of laser deposition manufactured TA15 titanium alloy were studied by optical microstructure (OM) and scanning electron microscopy (SEM). Furthermore, the lamellar deformation mechanism was also discussed. The results indicate that microstructure is basketweave structure or near basketweave structure after alpha+beta phase zone annealing treatment; pattern and size of a phase is affected effectively by annealing temperature. The mechanical properties after annealing still show the anisotropy in different directions: the strength is low and the plasticity is high in deposition direction while the strength is high and the plasticity is low in vertical deposition direction. The interlayer binding zone slip deformation plays a vanguard role and the columnar crystal grain boundary has a bound effect on a phase slip deformation. Microhardness is affected by the amount of a phase while it changes little with the increase of annealing temperature. a lamellar in basketweave structure under the stress changes from near orthogonal to near parallel to the direction of stress, and staggered arrangement of a lamellar generates resistance between each other when it is in the state of slip deformation. Both deposition direction and vertical deposition direction have same tensile fracture modes which is ductile fracture after alpha+beta phase zone annealing treatment. |
| 语种 | 英语 |
| CSCD记录号 | CSCD:6039523 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/148275]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Yang Guang,Wang Wendong,Qin Lanyun,et al. Annealing Treatment and Basketweave Structure Deformation Mechanism of Laser Deposition Manufactured TA15 Titanium Alloy[J]. RARE METAL MATERIALS AND ENGINEERING,2017,46(7):1935-1942. |
| APA | Yang Guang,Wang Wendong,Qin Lanyun,Ren Yuhang,Li Changfu,&Wang Wei.(2017).Annealing Treatment and Basketweave Structure Deformation Mechanism of Laser Deposition Manufactured TA15 Titanium Alloy.RARE METAL MATERIALS AND ENGINEERING,46(7),1935-1942. |
| MLA | Yang Guang,et al."Annealing Treatment and Basketweave Structure Deformation Mechanism of Laser Deposition Manufactured TA15 Titanium Alloy".RARE METAL MATERIALS AND ENGINEERING 46.7(2017):1935-1942. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。