MODELING OF THREE-PHASE (GAS/MOLTEN STEEL/SLAG) FLOWS AND SLAG LAYER BEHAVIOR IN AN ARGON GAS STIRRED LADLE
文献类型：期刊论文
| 作者 | Li Baokuan1; Gu Mingyan2; Qi Fengsheng1; Wang Fang1; Zhou Qian Chenn Q Zhou3 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2008 |
| 卷号 | 44期号:10页码:1198-1202 |
| 关键词 | BATH ladle slag layer behavior three-phase flow mathematical model |
| ISSN号 | 0412-1961 |
| 其他题名 | MODELING OF THREE-PHASE （GAS/MOLTEN STEEL/ SLAG） FLOWS AND SLAG LAYER BEHAVIOR IN AN ARGON GAS STIRRED LADLE |
| 英文摘要 | A mathematical model was developed to analyze the transient three-dimensional and three-phase How in an argon gas bottom stirring ladle with one porous plug. Multiphase volume of fluid (VOF) method was used to simulate the kinetic behaviors of slag layer. Numerical results make the transient phenomena recur: when argon gas is injected into molten steel in a ladle, gas rising passage is formed near the plug. and then bubbles are created in the interior of molten steel; the rising gas bubbles impinge the slag intermittently and breakthrough the slag layer to create the slag eye. Simultaneously, the wave at interface of slag steel formed and wave, frequency increases with the increase of argon gas flow rate for one off-centered plug case. Parametric studies show that the diameter of slag eye changes from 0.43 to 0.81 in while the argon gas flow rate increases from 100 to 300 L/min for a 220 t ladle. The dimensionless areas of slag eye vs the modified Froude number is close to the experimental data in literature. Significant deformation of slag layer occurs during gas stirring operation. the thickness of slag becomes thin near the slag eye and thick near the ladle wall accordingly. The steel downward How velocity at the slag eye periphery can be affected significantly by Ar gas flow rate. The higher the velocity. the more slag could be emulsified. |
| 语种 | 英语 |
| CSCD记录号 | CSCD:3420302 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/148753]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.中国科学院金属研究所 2.安徽大学 3.普渡大学 |
| 推荐引用方式 GB/T 7714 | Li Baokuan,Gu Mingyan,Qi Fengsheng,et al. MODELING OF THREE-PHASE (GAS/MOLTEN STEEL/SLAG) FLOWS AND SLAG LAYER BEHAVIOR IN AN ARGON GAS STIRRED LADLE[J]. ACTA METALLURGICA SINICA,2008,44(10):1198-1202. |
| APA | Li Baokuan,Gu Mingyan,Qi Fengsheng,Wang Fang,&Zhou Qian Chenn Q Zhou.(2008).MODELING OF THREE-PHASE (GAS/MOLTEN STEEL/SLAG) FLOWS AND SLAG LAYER BEHAVIOR IN AN ARGON GAS STIRRED LADLE.ACTA METALLURGICA SINICA,44(10),1198-1202. |
| MLA | Li Baokuan,et al."MODELING OF THREE-PHASE (GAS/MOLTEN STEEL/SLAG) FLOWS AND SLAG LAYER BEHAVIOR IN AN ARGON GAS STIRRED LADLE".ACTA METALLURGICA SINICA 44.10(2008):1198-1202. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。