Penetration of disk fragments following impact on thin plate
文献类型:期刊论文
作者 | Juanjuan LI1; Haijun XUAN1; Lianfang LIAO2; Weirong HONG1; Rongren WU1 |
刊名 | 浙江大学学报:A卷英文版
![]() |
出版日期 | 2009 |
卷号 | 10.0期号:005页码:677-684 |
关键词 | 磁盘碎片 双层薄板 MSC.Dytran 模拟分析软件 渗透 非线性动力学 显式有限元法 弹道极限速度 |
ISSN号 | 1673-565X |
其他题名 | Penetration of disk fragments following impact on thin plate |
英文摘要 | To investigate the ballistic resistance and failure pattern of aeroengine casing following the impact of disk fragments, and to determine the optimum case structure, the phenomena of a 1/3rd disk fragment impact on single and double-layered thin plate targets were simulated using nonlinear dynamical analysis software MSC.Dytran. Strain rate effect was introduced in a Johnson-Cook (JC) material model for the disk fragment and the plate. Impact modeling was based on the Arbitrary Lagrange-Eulerian method, and simulated using explicit finite element method (FEM). Simulation results showed that the major failure pattern of the plate is shearing and tensile fracture with large plastic deformation. It was also concluded that the ballistic limit velocity increases with the standoffdistance when it is beyond a certain value, and that greater resistance is obtained when the front plate has either a proportionately low or high thickness. The impact resistance of a double-layered plate may exceed that of a single plate if the thicknesses and standoff distance of the two plates are set appropriately. |
语种 | 中文 |
CSCD记录号 | CSCD:3643009 |
源URL | [http://ir.imr.ac.cn/handle/321006/150003] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
作者单位 | 1.浙江大学 2.中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Juanjuan LI,Haijun XUAN,Lianfang LIAO,et al. Penetration of disk fragments following impact on thin plate[J]. 浙江大学学报:A卷英文版,2009,10.0(005):677-684. |
APA | Juanjuan LI,Haijun XUAN,Lianfang LIAO,Weirong HONG,&Rongren WU.(2009).Penetration of disk fragments following impact on thin plate.浙江大学学报:A卷英文版,10.0(005),677-684. |
MLA | Juanjuan LI,et al."Penetration of disk fragments following impact on thin plate".浙江大学学报:A卷英文版 10.0.005(2009):677-684. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。