Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts
文献类型：期刊论文
| 作者 | Chen Shulin1; Zheng Guolei1; Zhou Min1; Du Baorui2; Chu Hongzhen2 |
| 刊名 | CHINESE JOURNAL OF AERONAUTICS
 |
| 出版日期 | 2013 |
| 卷号 | 26期号:5页码:1324-1335 |
| 关键词 | TOOL-PATH GENERATION OPERATIONS SELECTION SYSTEM SURFACES FEATURES Aircraft structural part (ASP) Automatic programming Machining cell Process planning Process scheme Residual volume |
| ISSN号 | 1000-9361 |
| 其他题名 | Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts |
| 英文摘要 | In order to enhance the NC programming efficiency and quality of aircraft structural parts (ASPs), an intelligent NC programming pattern driven by process schemes is presented. In this pattern, the NC machining cell is the minimal organizational structure in the technological process, consisting of an operation machining volume cell, and the type and parameters of the machining operation. After the machining cell construction, the final NC program can be easily obtained in a CAD/CAM system by instantiating the machining operation for each machining cell. Accordingly, how to automatically establish the machining cells is a key issue in intelligent NC programming. On the basis of the NC machining craft of ASP, the paper aims to make an in-depth research on this issue. Firstly, some new terms about the residual volume and the machinable volume are defined, and then, the technological process is modeled with a process scheme. Secondly, the approach to building the machining cells is introduced, in which real-time complement machining is mainly considered to avoid interference and overcutting. Thirdly, the implementing algorithm is designed and applied to the Intelligent NC Programming System of ASP. Finally, the developed algorithm is validated through two case studies. (C) 2013 Production and hosting by Elsevier Ltd. on behalf of CSAA & BUAA. |
| 资助项目 | [National Science and Technology Major Project] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:4957390 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/151056]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.北京航空航天大学 2.中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Chen Shulin,Zheng Guolei,Zhou Min,et al. Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts[J]. CHINESE JOURNAL OF AERONAUTICS,2013,26(5):1324-1335. |
| APA | Chen Shulin,Zheng Guolei,Zhou Min,Du Baorui,&Chu Hongzhen.(2013).Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts.CHINESE JOURNAL OF AERONAUTICS,26(5),1324-1335. |
| MLA | Chen Shulin,et al."Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts".CHINESE JOURNAL OF AERONAUTICS 26.5(2013):1324-1335. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。