A New Pb-Free Machinable Austenitic Stainless Steel
文献类型：期刊论文
| 作者 | Wu Di1; Li Zhuang2 |
| 刊名 | JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
 |
| 出版日期 | 2010 |
| 卷号 | 17期号:1页码:59-63 |
| 关键词 | MECHANISM TOOL Pb-free machinable austenitic stainless steel machinable additive bismuth machinability mechanical property |
| ISSN号 | 1006-706X |
| 其他题名 | A New Pb-Free Machinable Austenitic Stainless Steel |
| 英文摘要 | The machinability tests were conducted by using various process parameters on a CA6164 lathe with a dynamometer. The metallurgical properties, machinability and mechanical properties of the developed alloy were compared with those of an austenite stainless steel 1Cr18Ni9Ti. The results show that the machinability of the austenitic stainless steels with free cutting additives is much better than that of 1Cr18Ni9Ti. This is attributed to the existence of machinable additives. The inclusions might be composed of MnS. Sulfur and copper addition contributes to the improvement of the machinability of austenitic stainless steel. Bismuth is an important factor to improve the machinability of austenitic stainless steel, and it has a distinct advantage over lead. The mechanical properties of the free cutting austenitic stainless steel are similar to those of 1Cr18Ni9Ti. A new Pb-free austenitic stainless steel with high machinability as well as satisfactory mechanical properties has been developed. |
| 资助项目 | [National Natural Science Foundation of China] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:3817938 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/151846]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.东北大学 2.中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Wu Di,Li Zhuang. A New Pb-Free Machinable Austenitic Stainless Steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2010,17(1):59-63. |
| APA | Wu Di,&Li Zhuang.(2010).A New Pb-Free Machinable Austenitic Stainless Steel.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,17(1),59-63. |
| MLA | Wu Di,et al."A New Pb-Free Machinable Austenitic Stainless Steel".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL 17.1(2010):59-63. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。