Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties
文献类型：期刊论文
| 作者 | Li Huabing; Jiang Zhouhua; Cao Yang; Zhang Zurui |
| 刊名 | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
 |
| 出版日期 | 2009 |
| 卷号 | 16期号:4页码:387-392 |
| 关键词 | CLEAVAGE-LIKE FRACTURE TEMPERATURE high nitrogen austenitic stainless steels electroslag remelting nitrogen alloying ductile-brittle transition pitting corrosion resistance |
| ISSN号 | 1674-4799 |
| 其他题名 | Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties |
| 英文摘要 | A series of high nitrogen austenitic stainless steels were successfully developed with a pressurized electroslag remelting furnace. Nitride additives and deoxidizer were packed into the stainless steel pipes, and then the stainless steel pipes were welded on the surface of an electrode with low nitrogen content to prepare a compound electrode. Using Si(3)N(4) as a nitrogen alloying source, the silicon contents in the ingots were prone to be out of the specification range, the electric current fluctuated greatly and the surface qualities of the ingots were poor. The surface qualities of the ingots were improved with FeCrN as a nitrogen alloying source. The sound and compact macrostructure ingot with the maximum nitrogen content of 1.21 wt% can be obtained. The 18Cr18Mn2Mo0.9N high nitrogen austenitic stainless steel exhibits high strength and good ductility at room temperature. The steel shows typical ductile-brittle transition behavior and excellent pitting corrosion resistance properties. |
| 资助项目 | [National Natural Science Foundation of China] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:3675642 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/152833]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Li Huabing,Jiang Zhouhua,Cao Yang,et al. Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2009,16(4):387-392. |
| APA | Li Huabing,Jiang Zhouhua,Cao Yang,&Zhang Zurui.(2009).Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties.INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,16(4),387-392. |
| MLA | Li Huabing,et al."Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties".INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS 16.4(2009):387-392. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。